From: Eli Cohen <[email protected]> Add support for Mellanox Connect-IB driver. This patch presents the changes to makefiles and Kconfigs to allow actually building this driver.
Signed-off-by: Eli Cohen <[email protected]> --- MAINTAINERS | 22 ++++++++++++++++++++++ drivers/infiniband/Kconfig | 1 + drivers/infiniband/Makefile | 1 + drivers/infiniband/hw/mlx5/Kconfig | 10 ++++++++++ drivers/infiniband/hw/mlx5/Makefile | 4 ++++ drivers/net/ethernet/mellanox/Kconfig | 1 + drivers/net/ethernet/mellanox/Makefile | 1 + drivers/net/ethernet/mellanox/mlx5/core/Kconfig | 18 ++++++++++++++++++ drivers/net/ethernet/mellanox/mlx5/core/Makefile | 6 ++++++ 9 files changed, 64 insertions(+) create mode 100644 drivers/infiniband/hw/mlx5/Kconfig create mode 100644 drivers/infiniband/hw/mlx5/Makefile create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/Kconfig create mode 100644 drivers/net/ethernet/mellanox/mlx5/core/Makefile diff --git a/MAINTAINERS b/MAINTAINERS index fd3a495..ee5add9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5349,6 +5349,28 @@ W: http://linuxtv.org S: Odd Fixes F: drivers/media/radio/radio-miropcm20* +Mellanox MLX5 core VPI driver +M: Eli Cohen <[email protected]> +L: [email protected] +L: [email protected] +W: http://www.mellanox.com +Q: http://patchwork.ozlabs.org/project/netdev/list/ +Q: http://patchwork.kernel.org/project/linux-rdma/list/ +T: git://openfabrics.org/~eli/connect-ib.git +S: Supported +F: drivers/net/ethernet/mellanox/mlx5/core/ +F: include/linux/mlx5/ + +Mellanox MLX5 IB driver +M: Eli Cohen <[email protected]> +L: [email protected] +W: http://www.mellanox.com +Q: http://patchwork.kernel.org/project/linux-rdma/list/ +T: git://openfabrics.org/~eli/connect-ib.git +S: Supported +F: include/linux/mlx5/ +F: drivers/infiniband/hw/mlx5/ + MODULE SUPPORT M: Rusty Russell <[email protected]> S: Maintained diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index c85b56c..5ceda71 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -50,6 +50,7 @@ source "drivers/infiniband/hw/amso1100/Kconfig" source "drivers/infiniband/hw/cxgb3/Kconfig" source "drivers/infiniband/hw/cxgb4/Kconfig" source "drivers/infiniband/hw/mlx4/Kconfig" +source "drivers/infiniband/hw/mlx5/Kconfig" source "drivers/infiniband/hw/nes/Kconfig" source "drivers/infiniband/hw/ocrdma/Kconfig" diff --git a/drivers/infiniband/Makefile b/drivers/infiniband/Makefile index b126fef..1fe6988 100644 --- a/drivers/infiniband/Makefile +++ b/drivers/infiniband/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_INFINIBAND_AMSO1100) += hw/amso1100/ obj-$(CONFIG_INFINIBAND_CXGB3) += hw/cxgb3/ obj-$(CONFIG_INFINIBAND_CXGB4) += hw/cxgb4/ obj-$(CONFIG_MLX4_INFINIBAND) += hw/mlx4/ +obj-$(CONFIG_MLX5_INFINIBAND) += hw/mlx5/ obj-$(CONFIG_INFINIBAND_NES) += hw/nes/ obj-$(CONFIG_INFINIBAND_OCRDMA) += hw/ocrdma/ obj-$(CONFIG_INFINIBAND_IPOIB) += ulp/ipoib/ diff --git a/drivers/infiniband/hw/mlx5/Kconfig b/drivers/infiniband/hw/mlx5/Kconfig new file mode 100644 index 0000000..8e6aebf --- /dev/null +++ b/drivers/infiniband/hw/mlx5/Kconfig @@ -0,0 +1,10 @@ +config MLX5_INFINIBAND + tristate "Mellanox Connect-IB HCA support" + depends on NETDEVICES && ETHERNET && PCI && X86 + select NET_VENDOR_MELLANOX + select MLX5_CORE + ---help--- + This driver provides low-level InfiniBand support for + Mellanox Connect-IB PCI Express host channel adapters (HCAs). + This is required to use InfiniBand protocols such as + IP-over-IB or SRP with these devices. diff --git a/drivers/infiniband/hw/mlx5/Makefile b/drivers/infiniband/hw/mlx5/Makefile new file mode 100644 index 0000000..0f492da --- /dev/null +++ b/drivers/infiniband/hw/mlx5/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_MLX5_INFINIBAND) += mlx5_ib.o +ccflags-y += -Wall -Werror -DDEBUG + +mlx5_ib-y := main.o cq.o doorbell.o qp.o mem.o srq.o mr.o ah.o mad.o diff --git a/drivers/net/ethernet/mellanox/Kconfig b/drivers/net/ethernet/mellanox/Kconfig index bcdbc14..8cf7563 100644 --- a/drivers/net/ethernet/mellanox/Kconfig +++ b/drivers/net/ethernet/mellanox/Kconfig @@ -19,5 +19,6 @@ config NET_VENDOR_MELLANOX if NET_VENDOR_MELLANOX source "drivers/net/ethernet/mellanox/mlx4/Kconfig" +source "drivers/net/ethernet/mellanox/mlx5/core/Kconfig" endif # NET_VENDOR_MELLANOX diff --git a/drivers/net/ethernet/mellanox/Makefile b/drivers/net/ethernet/mellanox/Makefile index 37afb96..38fe32ef 100644 --- a/drivers/net/ethernet/mellanox/Makefile +++ b/drivers/net/ethernet/mellanox/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_MLX4_CORE) += mlx4/ +obj-$(CONFIG_MLX5_CORE) += mlx5/core/ diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Kconfig b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig new file mode 100644 index 0000000..2196282 --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx5/core/Kconfig @@ -0,0 +1,18 @@ +# +# Mellanox driver configuration +# + +config MLX5_CORE + tristate + depends on PCI && X86 + default n + +config MLX5_DEBUG + bool "Verbose debugging output" if (MLX5_CORE && EXPERT) + depends on MLX5_CORE + default y + ---help--- + This option causes debugging code to be compiled into the + mlx5_core driver. The output can be turned on via the + debug_mask module parameter (which can also be set after + the driver is loaded through sysfs). diff --git a/drivers/net/ethernet/mellanox/mlx5/core/Makefile b/drivers/net/ethernet/mellanox/mlx5/core/Makefile new file mode 100644 index 0000000..7687819 --- /dev/null +++ b/drivers/net/ethernet/mellanox/mlx5/core/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_MLX5_CORE) += mlx5_core.o +ccflags-y += -Wall -Werror -DDEBUG + +mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \ + health.o mcg.o cq.o srq.o alloc.o qp.o port.o mr.o pd.o \ + mad.o -- 1.8.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
