From: Geert Uytterhoeven <[email protected]>

Warning (unit_address_vs_reg): Node /memory has a reg or ranges property, but 
no unit name
Warning (unit_address_vs_reg): Node /regulator@0 has a unit name, but no reg 
property
Warning (unit_address_vs_reg): Node /regulator@1 has a unit name, but no reg 
property
Warning (unit_address_vs_reg): Node /regulator@2 has a unit name, but no reg 
property
Warning (unit_address_vs_reg): Node /regulator@3 has a unit name, but no reg 
property
Warning (unit_address_vs_reg): Node /i2c@2 has a unit name, but no reg property

Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
---
 arch/arm/boot/dts/r8a7740-armadillo800eva.dts | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts 
b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
index 2c82dab2b6f4..162049516685 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -28,12 +28,12 @@
                stdout-path = &scifa1;
        };
 
-       memory {
+       memory@40000000 {
                device_type = "memory";
                reg = <0x40000000 0x20000000>;
        };
 
-       reg_3p3v: regulator@0 {
+       reg_3p3v: regulator-3p3v {
                compatible = "regulator-fixed";
                regulator-name = "fixed-3.3V";
                regulator-min-microvolt = <3300000>;
@@ -42,7 +42,7 @@
                regulator-boot-on;
        };
 
-       vcc_sdhi0: regulator@1 {
+       vcc_sdhi0: regulator-vcc-sdhi0 {
                compatible = "regulator-fixed";
 
                regulator-name = "SDHI0 Vcc";
@@ -53,7 +53,7 @@
                enable-active-high;
        };
 
-       vccq_sdhi0: regulator@2 {
+       vccq_sdhi0: regulator-vccq-sdhi0 {
                compatible = "regulator-gpio";
 
                regulator-name = "SDHI0 VccQ";
@@ -69,7 +69,7 @@
                enable-active-high;
        };
 
-       reg_5p0v: regulator@3 {
+       reg_5p0v: regulator-5p0v {
                compatible = "regulator-fixed";
                regulator-name = "fixed-5.0V";
                regulator-min-microvolt = <5000000>;
@@ -127,7 +127,7 @@
                };
        };
 
-       i2c2: i2c@2 {
+       i2c2: i2c-2 {
                #address-cells = <1>;
                #size-cells = <0>;
                compatible = "i2c-gpio";
-- 
2.1.4

Reply via email to