Add support for the general purpose software switches SW2 and tactile switches SW24/25 as a virtual keyboard (like it was done with the Lager/ Koelsch boards).
Signed-off-by: Sergei Shtylyov <[email protected]> --- This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon Horman's 'renesas.git' repo. arch/arm/boot/dts/r8a7792-blanche.dts | 49 ++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts @@ -11,6 +11,8 @@ /dts-v1/; #include "r8a7792.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> / { model = "Blanche"; @@ -54,6 +56,53 @@ pinctrl-0 = <&lan89218_pins>; pinctrl-names = "default"; }; + + keyboard { + compatible = "gpio-keys"; + + key-1 { + linux,code = <KEY_1>; + label = "SW2-1"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 10 GPIO_ACTIVE_LOW>; + }; + key-2 { + linux,code = <KEY_2>; + label = "SW2-2"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + }; + key-3 { + linux,code = <KEY_3>; + label = "SW2-3"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + }; + key-4 { + linux,code = <KEY_4>; + label = "SW2-4"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; + }; + key-a { + linux,code = <KEY_A>; + label = "SW24"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio3 20 GPIO_ACTIVE_LOW>; + }; + key-b { + linux,code = <KEY_B>; + label = "SW25"; + wakeup-source; + debounce-interval = <20>; + gpios = <&gpio11 2 GPIO_ACTIVE_LOW>; + }; + }; }; &extal_clk {
