On Mon, Aug 22, 2016 at 01:34:12PM +0300, Sergei Shtylyov wrote: > Hello. > > On 8/22/2016 10:41 AM, Simon Horman wrote: > > >>Define the Blanche board dependent part of the DU device node. > >>Add the device nodes for the Analog Devices ADV7511W HDMI transmitter > >>(connected to DU0) and ADV7123 video DAC (connected to DU1). Add the > >>necessary subnodes to interconnect DU, HDMI/VDAC devices, and HDMI/VGA > >>connectors. > >> > >>Signed-off-by: Sergei Shtylyov <[email protected]> > >> > >>--- > >>This patch is against the 'renesas-devel-20160817-v4.8-rc2' of Simon > >>Horman's > >>'renesas.git' repo plus the general purpose switches patch and the SDHI0 > >>patch > >>posted earlier. > >> > >> arch/arm/boot/dts/r8a7792-blanche.dts | 125 > >> ++++++++++++++++++++++++++++++++++ > >> 1 file changed, 125 insertions(+) > >> > >>Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts > >>=================================================================== > >>--- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts > >>+++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts > > > >... > > > >>@@ -186,3 +251,63 @@ > >> cd-gpios = <&gpio11 11 GPIO_ACTIVE_LOW>; > >> status = "okay"; > >> }; > >>+ > >>+&i2c1 { > >>+ status = "okay"; > >>+ clock-frequency = <400000>; > > > >Is it intentional that there are no pinctrl properties here? > > Yes, as I commented in r8a7792.dtsi, all I2C pins are not multiplexed.
Thanks for satisfying my curiosity. I have queued this up.
