On Tue, Sep 20, 2016 at 06:35:00PM +0900, Jaehoon Chung wrote: > On 09/20/2016 05:57 AM, Wolfram Sang wrote: > > We need to add R1 without CRC support, refactor the bus width routine a > > little and extend a quirk check. To support "non-removable;" we need a > > workaround which will be hopefully removed when reworking PM soon. > > > > Signed-off-by: Wolfram Sang <wsa+rene...@sang-engineering.com> > > --- > > drivers/mmc/host/tmio_mmc.h | 3 +++ > > drivers/mmc/host/tmio_mmc_pio.c | 38 ++++++++++++++++++++++++++------------ > > 2 files changed, 29 insertions(+), 12 deletions(-) > > > > diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h > > index 4b501f2d529f6e..637581faf756b1 100644 > > --- a/drivers/mmc/host/tmio_mmc.h > > +++ b/drivers/mmc/host/tmio_mmc.h > > @@ -79,6 +79,9 @@ > > #define CLK_CTL_DIV_MASK 0xff > > #define CLK_CTL_SCLKEN BIT(8) > > > > +#define CARD_OPT_WIDTH8 BIT(13) > > +#define CARD_OPT_WIDTH BIT(15) > > Just confusing whether CARD_OPT_WIDTH is 4bit or 1bit?
The HW is confusing. Setting the bit sets 1-bit mode. This is why I put
the comment below in the code:
> > + u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT)
> > + & ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8);
> > +
> > + /* reg now applies to MMC_BUS_WIDTH_4 */
This comment I meant ^^^
> > + if (bus_width == MMC_BUS_WIDTH_1)
> > + reg |= CARD_OPT_WIDTH;
...
> > switch (mmc_resp_type(cmd)) {
> > case MMC_RSP_NONE: c |= RESP_NONE; break;
> > - case MMC_RSP_R1: c |= RESP_R1; break;
> > + case MMC_RSP_R1:
> > + case MMC_RSP_R1_NO_CRC:
> > + c |= RESP_R1; break;
>
> Just wonder..It there case that hit "case MMC_RSP_R1_NO_CRC" ?
Yes, as described in my response to patch 1. It doesn't work without.
signature.asc
Description: PGP signature
