On 14 October 2016 at 15:18, Chris Brandt <chris.bra...@renesas.com> wrote: > On 9/22/2016, Ulf Hansson wrote: >> To: Chris Brandt <chris.bra...@renesas.com> >> Cc: Wolfram Sang <wsa+rene...@sang-engineering.com>; Sergei Shtylyov >> <sergei.shtyl...@cogentembedded.com>; Geert Uytterhoeven <geert@linux- >> m68k.org>; Simon Horman <horms+rene...@verge.net.au>; linux-mmc <linux- >> m...@vger.kernel.org>; Linux-Renesas <linux-renesas-soc@vger.kernel.org>; >> Lee Jones <l...@kernel.org> >> Subject: Re: [PATCH v3 2/3] mmc: tmio-mmc: add support for 32bit data port >> >> + Lee >> >> On 12 September 2016 at 16:15, Chris Brandt <chris.bra...@renesas.com> >> wrote: >> > For the r7s72100 SOC, the DATA_PORT register was changed to 32-bits wide. >> > Therefore a new flag has been created that will allow 32-bit >> > reads/writes to the DATA_PORT register instead of 16-bit (because >> > 16-bits accesses are not supported). >> > >> > Signed-off-by: Chris Brandt <chris.bra...@renesas.com> >> > --- >> > v3: >> > * changed loops to memcpy >> > v2: >> > * changed 'data * 0xFF' to 'data & 0xFF' >> > * added 'const' for sd_ctrl_write32_rep >> > --- >> > drivers/mmc/host/tmio_mmc.h | 12 ++++++++++++ >> > drivers/mmc/host/tmio_mmc_pio.c | 30 ++++++++++++++++++++++++++++++ >> > include/linux/mfd/tmio.h | 5 +++++ >> >> This header file needs to be split up. The mmc specific bits, should be >> moved to a local header file under driver/mmc/host/*. >> >> Sure, we don't need to do that as part of $subject patch, but then I need >> an ack from Lee Jones, the mfd maintainer. I have added him on cc. > > > Is this still waiting on an ACK from Lee Jones because it touches the tmio.h > file under include/linux/mfd/ ? >
Yes, but more important is Wolfram's ack as he maintains drivers/mmc/host/tmio_mmc* Kind regards Uffe
