Identical to the setup on Lager.

Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
---
 arch/arm/boot/dts/r8a7793-gose.dts | 64 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7793-gose.dts 
b/arch/arm/boot/dts/r8a7793-gose.dts
index dc311eb..a47ea4b 100644
--- a/arch/arm/boot/dts/r8a7793-gose.dts
+++ b/arch/arm/boot/dts/r8a7793-gose.dts
@@ -253,6 +253,17 @@
                };
        };
 
+       hdmi-in {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&adv7612_in>;
+                       };
+               };
+       };
+
        hdmi-out {
                compatible = "hdmi-connector";
                type = "a";
@@ -374,6 +385,11 @@
                groups = "audio_clk_a";
                function = "audio_clk";
        };
+
+       vin0_pins: vin0 {
+               groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+               function = "vin0";
+       };
 };
 
 &ether {
@@ -531,6 +547,33 @@
                };
        };
 
+       hdmi-in@4c {
+               compatible = "adi,adv7612";
+               reg = <0x4c>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+               default-input = <0>;
+
+               port {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               adv7612_in: endpoint {
+                                       remote-endpoint = <&hdmi_con_in>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               adv7612_out: endpoint {
+                                       remote-endpoint = <&vin0ep2>;
+                               };
+                       };
+               };
+       };
+
        eeprom@50 {
                compatible = "renesas,r1ex24002", "atmel,24c02";
                reg = <0x50>;
@@ -558,3 +601,24 @@
 &ssi1 {
        shared-pin;
 };
+
+/* HDMI video input */
+&vin0 {
+       status = "okay";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep2: endpoint {
+                       remote-endpoint = <&adv7612_out>;
+                       bus-width = <24>;
+                       hsync-active = <0>;
+                       vsync-active = <0>;
+                       pclk-sample = <1>;
+                       data-active = <1>;
+               };
+       };
+};
-- 
2.7.4

Reply via email to