Hi Ulrich,

Thank you for the patch.

On Tuesday 18 Oct 2016 17:02:22 Ulrich Hecht wrote:
> Identical to the setup on Lager.

You probably mean on Koelsch ?

> Signed-off-by: Ulrich Hecht <ulrich.hecht+rene...@gmail.com>
> ---
>  arch/arm/boot/dts/r8a7793-gose.dts | 64 +++++++++++++++++++++++++++++++++++
>  1 file changed, 64 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7793-gose.dts
> b/arch/arm/boot/dts/r8a7793-gose.dts index dc311eb..a47ea4b 100644
> --- a/arch/arm/boot/dts/r8a7793-gose.dts
> +++ b/arch/arm/boot/dts/r8a7793-gose.dts
> @@ -253,6 +253,17 @@
>               };
>       };
> 
> +     hdmi-in {
> +             compatible = "hdmi-connector";
> +             type = "a";
> +
> +             port {
> +                     hdmi_con_in: endpoint {
> +                             remote-endpoint = <&adv7612_in>;
> +                     };
> +             };
> +     };
> +
>       hdmi-out {
>               compatible = "hdmi-connector";
>               type = "a";

For consistency you might want to rename the hdmi-out endpoint like you did 
for Lager and Koelsch.

With that fixed,

Reviewed-by: Laurent Pinchart <laurent.pinch...@ideasonboard.com>

> @@ -374,6 +385,11 @@
>               groups = "audio_clk_a";
>               function = "audio_clk";
>       };
> +
> +     vin0_pins: vin0 {
> +             groups = "vin0_data24", "vin0_sync", "vin0_clkenb", 
"vin0_clk";
> +             function = "vin0";
> +     };
>  };
> 
>  &ether {
> @@ -531,6 +547,33 @@
>               };
>       };
> 
> +     hdmi-in@4c {
> +             compatible = "adi,adv7612";
> +             reg = <0x4c>;
> +             interrupt-parent = <&gpio4>;
> +             interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
> +             default-input = <0>;
> +
> +             port {
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +
> +                     port@0 {
> +                             reg = <0>;
> +                             adv7612_in: endpoint {
> +                                     remote-endpoint = <&hdmi_con_in>;
> +                             };
> +                     };
> +
> +                     port@2 {
> +                             reg = <2>;
> +                             adv7612_out: endpoint {
> +                                     remote-endpoint = <&vin0ep2>;
> +                             };
> +                     };
> +             };
> +     };
> +
>       eeprom@50 {
>               compatible = "renesas,r1ex24002", "atmel,24c02";
>               reg = <0x50>;
> @@ -558,3 +601,24 @@
>  &ssi1 {
>       shared-pin;
>  };
> +
> +/* HDMI video input */
> +&vin0 {
> +     status = "okay";
> +     pinctrl-0 = <&vin0_pins>;
> +     pinctrl-names = "default";
> +
> +     port {
> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +
> +             vin0ep2: endpoint {
> +                     remote-endpoint = <&adv7612_out>;
> +                     bus-width = <24>;
> +                     hsync-active = <0>;
> +                     vsync-active = <0>;
> +                     pclk-sample = <1>;
> +                     data-active = <1>;
> +             };
> +     };
> +};

-- 
Regards,

Laurent Pinchart

Reply via email to