Hello,
On Thursday 26 Jan 2017 12:51:03 Sergei Shtylyov wrote:
> On 1/25/2017 9:09 PM, Jacopo Mondi wrote:
> > Add TxD and RxD pin configuration for SCIF2 serial communication
> > interface on r7s72100 Genmai board.
> >
> > Signed-off-by: Jacopo Mondi <[email protected]>
> > ---
> >
> > arch/arm/boot/dts/r7s72100-genmai.dts | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts
> > b/arch/arm/boot/dts/r7s72100-genmai.dts index 118a8e2..ea649c7 100644
> > --- a/arch/arm/boot/dts/r7s72100-genmai.dts
> > +++ b/arch/arm/boot/dts/r7s72100-genmai.dts
>
> [...]
>
> > @@ -34,6 +35,18 @@
> > #address-cells = <1>;
> > #size-cells = <1>;
> > };
> > +
That's not needed.
> > +};
> > +
> > +&pinctrl {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&scif2_pins>;
> > +
> > + scif2_pins: serial2 {
> > + /* P3_0 as TxD2; P3_2 as RxD2 */
> > + renesas-rz,pins = <RZ_PIN(3, 0) ALTERNATE_FUNC_6>,
>
> The comma should be after the vendor prefix ("renesas").
And the "-rz" suffix isn't needed, "renesas,pins" will do.
--
Regards,
Laurent Pinchart
