Hi Jacopo,
On Tue, Jan 31, 2017 at 10:12 AM, jacopo mondi <[email protected]> wrote:
> On 30/01/2017 19:30, Laurent Pinchart wrote:
>> On Thursday 26 Jan 2017 20:52:33 Geert Uytterhoeven wrote:
>>> On Wed, Jan 25, 2017 at 7:09 PM, Jacopo Mondi wrote:
>>>> Add dt-bindings header for Renesas RZ pincontroller.
>>>> The header defines macros for pin description and alternate function
>>>> numbers.
>>>> --- /dev/null
>>>> +++ b/include/dt-bindings/pinctrl/pinctrl-renesas-rz.h
>>>> +#define RZ_PIN(b, p) b p
>>>
>>> And the advantage of this macro is?
>>>
>
> Nothing beside being cute
:-)
>>>> +#define ALTERNATE_FUNC_1 0
>>>> +#define ALTERNATE_FUNC_2 1
>>>> +#define ALTERNATE_FUNC_3 2
>>>> +#define ALTERNATE_FUNC_4 3
>>>> +#define ALTERNATE_FUNC_5 4
>>>> +#define ALTERNATE_FUNC_6 5
>>>> +#define ALTERNATE_FUNC_7 6
>>>> +#define ALTERNATE_FUNC_8 7
>>>
>>> I have mixed feelings about these macros:
>>> 1. They're long to type,
>>> 2. They just map from n to n-1.
>>>
>>> Why not use plain numbers 1..8 (the alternate function numbering in the
>>> datasheet is 1-based), and subtract 1 in the C code?
>>
>> I was about to mention the same. I think you can drop this patch and use
>> the
>> numbers directly.
>
> Please be aware there are values we'll have to define here, such as the
> additional configurations we're talking about in some other part of this
> email thread.
In that case you indeed have to OR values, but...
> This may become something like:
>
> #define ALT_FUNC_1 0
> #define ALT_FUNC_2 1
> #define ALT_FUNC_3 2
> #define ALT_FUNC_4 3
> #define ALT_FUNC_5 4
> #define ALT_FUNC_6 5
> #define ALT_FUNC_7 6
> #define ALT_FUNC_8 7
>
> #define INPUT_MODE 1
> #define BIDRECTIONAL 2
> #define ...
... if you integrate the shifts in the definitions above, e.g.
#define INPUT_MODE (1 << 16)
> #define PIN(b, p) b p
> #define PIN_MUX(func, conf) \
> ((func & 0xf) | ((conf) << 16))
>
> and in DTS sources you would describe a pin as
>
> pins = <PIN(bank, pin) PIN_MUX(ALT_FUNC_1, INPUT | BIDIRECTIONAL)>;
>
> We can drop the PIN macro as it does not bring anything I agree, but it's
> nicer to see imho
... you can keep plain 1-based numbers for alternate functions, and use
the definitions for flags, e.g.:
pins = <PIN(bank, pin) (1 | INPUT_MODE | BIDIRECTIONAL)>;
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
