From: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
"renesas,rsrc-card" is exchanged to "simple-scu-card".
Let's update Document
Signed-off-by: Kuninori Morimoto <kuninori.morimoto...@renesas.com>
---
.../devicetree/bindings/sound/renesas,rsnd.txt | 30 +++++++++++-----------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 15a7316..3332910 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
** Asynchronous mode
------------------
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
/*
* SRC Asynchronous mode setting
@@ -97,12 +97,12 @@ example)
* Inputed 48kHz data will be converted to
* system specified Hz
*/
- convert-rate = <48000>;
+ simple-audio-card,convert-rate = <48000>;
...
- cpu {
+ simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -141,23 +141,23 @@ For more detail information, see below
${LINUX}/sound/soc/sh/rcar/ctu.c
- comment of header
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
example)
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
/*
* CTU setting
* All input data will be converted to 2ch
* as output data
*/
- convert-channels = <2>;
+ simple-audio-card,convert-channels = <2>;
...
- cpu {
+ simple-audio-card,cpu {
sound-dai = <&rcar_sound>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
@@ -190,22 +190,22 @@ and these sounds will be merged by MIX.
aplay -D plughw:0,0 xxxx.wav &
aplay -D plughw:0,1 yyyy.wav
-You need to use "renesas,rsrc-card" sound card for it.
+You need to use "simple-scu-audio-card" sound card for it.
Ex)
[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
|
[MEM] -> [SRC2] -> [CTU03] -+
sound {
- compatible = "renesas,rsrc-card";
+ compatible = "simple-scu-audio-card";
...
- cpu@0 {
+ simple-audio-card,cpu@0 {
sound-dai = <&rcar_sound 0>;
};
- cpu@1 {
+ simple-audio-card,cpu@1 {
sound-dai = <&rcar_sound 1>;
};
- codec {
+ simple-audio-card,codec {
...
};
};
--
1.9.1
