Hi Morimoto-san, On 2017-05-15 01:59:51 +0000, Kuninori Morimoto wrote: > From: Kuninori Morimoto <[email protected]> > > "renesas,rsrc-card" is exchanged to "simple-scu-card". > Let's update Document
You state "simple-scu-audio-card" in the patch not "simple-scu-card", is this intentional or a typo? > > Signed-off-by: Kuninori Morimoto <[email protected]> > --- > .../devicetree/bindings/sound/renesas,rsnd.txt | 30 > +++++++++++----------- > 1 file changed, 15 insertions(+), 15 deletions(-) > > diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > index 15a7316..3332910 100644 > --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt > @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 > modes > ** Asynchronous mode > ------------------ > > -You need to use "renesas,rsrc-card" sound card for it. > +You need to use "simple-scu-audio-card" sound card for it. > example) > > sound { > - compatible = "renesas,rsrc-card"; > + compatible = "simple-scu-audio-card"; > ... > /* > * SRC Asynchronous mode setting > @@ -97,12 +97,12 @@ example) > * Inputed 48kHz data will be converted to > * system specified Hz > */ > - convert-rate = <48000>; > + simple-audio-card,convert-rate = <48000>; > ... > - cpu { > + simple-audio-card,cpu { > sound-dai = <&rcar_sound>; > }; > - codec { > + simple-audio-card,codec { > ... > }; > }; > @@ -141,23 +141,23 @@ For more detail information, see below > ${LINUX}/sound/soc/sh/rcar/ctu.c > - comment of header > > -You need to use "renesas,rsrc-card" sound card for it. > +You need to use "simple-scu-audio-card" sound card for it. > example) > > sound { > - compatible = "renesas,rsrc-card"; > + compatible = "simple-scu-audio-card"; > ... > /* > * CTU setting > * All input data will be converted to 2ch > * as output data > */ > - convert-channels = <2>; > + simple-audio-card,convert-channels = <2>; > ... > - cpu { > + simple-audio-card,cpu { > sound-dai = <&rcar_sound>; > }; > - codec { > + simple-audio-card,codec { > ... > }; > }; > @@ -190,22 +190,22 @@ and these sounds will be merged by MIX. > aplay -D plughw:0,0 xxxx.wav & > aplay -D plughw:0,1 yyyy.wav > > -You need to use "renesas,rsrc-card" sound card for it. > +You need to use "simple-scu-audio-card" sound card for it. > Ex) > [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] > | > [MEM] -> [SRC2] -> [CTU03] -+ > > sound { > - compatible = "renesas,rsrc-card"; > + compatible = "simple-scu-audio-card"; > ... > - cpu@0 { > + simple-audio-card,cpu@0 { > sound-dai = <&rcar_sound 0>; > }; > - cpu@1 { > + simple-audio-card,cpu@1 { > sound-dai = <&rcar_sound 1>; > }; > - codec { > + simple-audio-card,codec { > ... > }; > }; > -- > 1.9.1 > -- Regards, Niklas Söderlund
