Hi Vladimir, Thank you for the patch.
On Friday 07 Jul 2017 05:37:36 Vladimir Barinov wrote: > From: Vladimir Barinov <[email protected]> > > The ULCB board has one HDMI output connector. > > This connector is available on both the H3 and M3-W ULCB boards. > Add this to the ulcb.dtsi file. > > Signed-off-by: Vladimir Barinov > <[email protected]> --- > arch/arm64/boot/dts/renesas/ulcb.dtsi | 11 +++++++++++ > 1 file changed, 11 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi > b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 6f0a7ca..fc5408d 100644 > --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi > +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi > @@ -34,6 +34,17 @@ > clock-frequency = <11289600>; > }; > > + hdmi0-out { > + compatible = "hdmi-connector"; > + label = "HDMI0 OUT"; As far as I know there is no "HDMI0 OUT" label on the board or casing. You can remove the label property. Apart from that, Reviewed-by: Laurent Pinchart <[email protected]> > + type = "a"; > + > + port { > + hdmi0_con: endpoint { > + }; > + }; > + }; > + > keyboard { > compatible = "gpio-keys"; -- Regards, Laurent Pinchart
