Hi Laurent,
Thank you for the review!
On 10.07.2017 16:09, Laurent Pinchart wrote:
Hi Vladimir,
Thank you for the patch.
On Friday 07 Jul 2017 05:37:36 Vladimir Barinov wrote:
From: Vladimir Barinov <[email protected]>
The ULCB board has one HDMI output connector.
This connector is available on both the H3 and M3-W ULCB boards.
Add this to the ulcb.dtsi file.
Signed-off-by: Vladimir Barinov
<[email protected]> ---
arch/arm64/boot/dts/renesas/ulcb.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi
b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 6f0a7ca..fc5408d 100644
--- a/arch/arm64/boot/dts/renesas/ulcb.dtsi
+++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi
@@ -34,6 +34,17 @@
clock-frequency = <11289600>;
};
+ hdmi0-out {
+ compatible = "hdmi-connector";
+ label = "HDMI0 OUT";
As far as I know there is no "HDMI0 OUT" label on the board or casing. You can
remove the label property. Apart from that,
I was thinking that this is a label on schematic.
ULCB has similar schematic label as first HDMI connector on Salvator-X
"HDMI output(HDMI0)", hence I've just copied label name from Salvator-X
file.
Right, there is no such name on ULCB pcb or plastic cover.
Is it okay If I resend only one patch with label field removed?
Regards,
Vladimir
