On Wed, Sep 13, 2017 at 06:05:36PM +0100, Chris Paterson wrote: > From: Fabrizio Castro <[email protected]> > > Enable the SDHI1 controller on iWave RZ/G1E SoM. > > Signed-off-by: Fabrizio Castro <[email protected]> > Signed-off-by: Chris Paterson <[email protected]> > --- > This patch is based on renesas-devel-20170913-v4.13. > > > arch/arm/boot/dts/r8a7745-iwg22m.dtsi | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi > b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi > index e306e7c..f7f9cef 100644 > --- a/arch/arm/boot/dts/r8a7745-iwg22m.dtsi > +++ b/arch/arm/boot/dts/r8a7745-iwg22m.dtsi > @@ -9,6 +9,7 @@ > */ > > #include "r8a7745.dtsi" > +#include <dt-bindings/gpio/gpio.h> > > / { > compatible = "iwave,g22m", "renesas,r8a7745"; > @@ -38,6 +39,12 @@ > function = "mmc"; > }; > > + sdhi1_pins: sd1 { > + groups = "sdhi1_data4", "sdhi1_ctrl"; > + function = "sdhi1"; > + power-source = <3300>; > + }; > + > i2c3_pins: i2c3 { > groups = "i2c3_b"; > function = "i2c3"; > @@ -54,6 +61,16 @@ > status = "okay"; > }; > > +&sdhi1 { > + pinctrl-0 = <&sdhi1_pins>; > + pinctrl-names = "default"; > + > + vmmc-supply = <®_3p3v>; > + vqmmc-supply = <®_3p3v>; > + cd-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
No wp-gpios property means this is a µSD slot, right? Do you have any plans to enable sdr-50 and sdr-104? Is it not supported for some reason? I don't mind if its not enabled in this patch but I would like to know if it can be enabled or not and reflect that information in the wiki. http://elinux.org/index.php?title=Renesas-MMC-Enabled-Speeds > + status = "okay"; > +}; > + > &i2c3 { > pinctrl-0 = <&i2c3_pins>; > pinctrl-names = "default"; > -- > 1.9.1 >
