On Wed, Sep 13, 2017 at 06:05:39PM +0100, Chris Paterson wrote:
> From: Fabrizio Castro <[email protected]>
>
> Add support for the SPI NOR device used to boot up the system
> to the System on Module DT.
>
> Signed-off-by: Fabrizio Castro <[email protected]>
> Signed-off-by: Chris Paterson <[email protected]>
> ---
> This patch is based on renesas-devel-20170913-v4.13.
>
> This patch is dependant on:
> - "of: add vendor prefix for Silicon Storage Technology Inc."
> - "doc: dt: mtd: Add sst25vf016b to the list of supported chip names"
>
>
> arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
> b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
> index 4119737..75a8ca5 100644
> --- a/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
> +++ b/arch/arm/boot/dts/r8a7743-iwg20m.dtsi
> @@ -44,6 +44,11 @@
> function = "mmc";
> };
>
> + qspi_pins: qspi {
> + groups = "qspi_ctrl", "qspi_data2";
> + function = "qspi";
> + };
> +
> sdhi0_pins: sd0 {
> groups = "sdhi0_data4", "sdhi0_ctrl";
> function = "sdhi0";
> @@ -61,6 +66,27 @@
> status = "okay";
> };
>
> +&qspi {
> + pinctrl-0 = <&qspi_pins>;
> + pinctrl-names = "default";
> +
> + status = "okay";
> +
> + /* WARNING - This device contains the bootloader. Handle with care. */
> + flash: flash@0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "sst,sst25vf016b", "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <50000000>;
> + spi-tx-bus-width = <1>;
> + spi-rx-bus-width = <1>;
> + m25p,fast-read;
> + spi-cpol;
> + spi-cpha;
> + };
Does the device have partitions?
If so, should they be described here?
> +};
> +
> &sdhi0 {
> pinctrl-0 = <&sdhi0_pins>;
> pinctrl-names = "default";
> --
> 1.9.1
>
