Enable HS-USB device for the iWave G20D-Q7 carrier board based on
RZ/G1M.
Also disable the host mode support on usb otg port by default to avoid
pin conflicts.
Signed-off-by: Biju Das <biju....@bp.renesas.com>
Signed-off-by: Chris Paterson <chris.paters...@renesas.com>
---
arch/arm/boot/dts/iwg20d-q7-common.dtsi | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
index 1c072c0..e6b50c6 100644
--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi
+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi
@@ -58,6 +58,12 @@
};
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+};
+
&i2c2 {
pinctrl-0 = <&i2c2_pins>;
pinctrl-names = "default";
@@ -72,7 +78,7 @@
};
&pci0 {
- status = "okay";
+ status = "disabled";
pinctrl-0 = <&usb0_pins>;
pinctrl-names = "default";
};
--
1.9.1
