On Mon, Oct 09, 2017 at 07:18:24PM +0300, Sergei Shtylyov wrote: > Hello! > > On 10/09/2017 04:21 PM, Biju Das wrote: > > >Enable HS-USB device for the iWave G20D-Q7 carrier board based on > >RZ/G1M. > >Also disable the host mode support on usb otg port by default to avoid > >pin conflicts. > > > >Signed-off-by: Biju Das <[email protected]> > >Signed-off-by: Chris Paterson <[email protected]> > >--- > > arch/arm/boot/dts/iwg20d-q7-common.dtsi | 8 +++++++- > > 1 file changed, 7 insertions(+), 1 deletion(-) > > > >diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi > >b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > >index 1c072c0..e6b50c6 100644 > >--- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi > >+++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi > [...] > >@@ -72,7 +78,7 @@ > > }; > > &pci0 { > >- status = "okay"; > >+ status = "disabled"; > > I think you may just omit this prop -- you most prolly have it > "disabloed" in the R8A7743's DT.
Yes, I expect so too. > > pinctrl-0 = <&usb0_pins>; > > pinctrl-names = "default"; > > }; > > MBR, Sergei >
