From: Biju Das <[email protected]> Enable HS-USB device for the iWave G20D-Q7 carrier board based on RZ/G1M. Also disable the host mode support on usb otg port by default to avoid pin conflicts.
Signed-off-by: Biju Das <[email protected]> Signed-off-by: Chris Paterson <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm/boot/dts/iwg20d-q7-common.dtsi | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index 1c072c0a4888..efd8af9242d1 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -58,6 +58,12 @@ }; }; +&hsusb { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; @@ -72,7 +78,6 @@ }; &pci0 { - status = "okay"; pinctrl-0 = <&usb0_pins>; pinctrl-names = "default"; }; -- 2.11.0
