CAN1 interface is exposed via connector J3 found on the camera daughter board. This patch enables can1 DT node from within the daughter board specific dtsi.
Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Biju Das <[email protected]> --- arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi index 4db18f2..476273b 100644 --- a/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-dbcm-ca.dtsi @@ -32,6 +32,13 @@ }; }; +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &du { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -94,6 +101,11 @@ }; &pfc { + can1_pins: can1 { + groups = "can1_data_d"; + function = "can1"; + }; + du_pins: du { groups = "du_rgb888", "du_sync", "du_oddf", "du_clk_out_0"; function = "du"; -- 2.7.4
