CAN1 interface is exposed via connector J1 found on the HDMI daughter board. This patch enables can1 DT node from within the daughter board specific device tree.
Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Biju Das <[email protected]> --- arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts index a8a4ec8..d34de82 100644 --- a/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts +++ b/arch/arm/boot/dts/r8a7745-iwg22d-sodimm-dbhd-ca.dts @@ -54,6 +54,13 @@ }; }; +&can1 { + pinctrl-0 = <&can1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &hscif2 { pinctrl-0 = <&hscif2_pins>; pinctrl-names = "default"; @@ -105,6 +112,11 @@ }; &pfc { + can1_pins: can1 { + groups = "can1_data_b"; + function = "can1"; + }; + du0_pins: du0 { groups = "du0_rgb888", "du0_sync", "du0_disp", "du0_clk0_out"; function = "du0"; -- 2.7.4
