The timer node does not have any register properties and thus shouldn't be placed on the bus.
This problem is flagged by the compiler as follows: $ make DTC arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb arch/arm/boot/dts/r8a7743-iwg20d-q7.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property arch/arm/boot/dts/r8a7743-iwg20d-q7-dbcm-ca.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property DTC arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb arch/arm/boot/dts/r8a7743-sk-rzg1m.dtb: Warning (simple_bus_reg): Node /soc/timer missing or empty reg/ranges property Signed-off-by: Simon Horman <[email protected]> --- v2 * Avoid line-wrapping properties --- arch/arm/boot/dts/r8a7743.dtsi | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index d333a545956d..5ba0af76b29c 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -304,18 +304,6 @@ resets = <&cpg 407>; }; - timer { - compatible = "arm,armv7-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | - IRQ_TYPE_LEVEL_LOW)>; - }; - cpg: clock-controller@e6150000 { compatible = "renesas,r8a7743-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -1539,6 +1527,14 @@ clock-frequency = <0>; }; + timer { + compatible = "arm,armv7-timer"; + interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal { compatible = "fixed-clock"; -- 2.11.0
