On Tue, Dec 19, 2017 at 09:43:06AM +0100, Geert Uytterhoeven wrote: > Hi Simon, > > On Mon, Dec 18, 2017 at 10:40 PM, Simon Horman > <[email protected]> wrote: > > Sort root sub-nodes alphabetically for allow for easier maintenance > > to allow for > > > of this file. > > > > Signed-off-by: Simon Horman <[email protected]> > > Reviewed-by: Geert Uytterhoeven <[email protected]> > > > --- a/arch/arm/boot/dts/r8a7743.dtsi > > +++ b/arch/arm/boot/dts/r8a7743.dtsi > > > cpus { > > #address-cells = <1>; > > #size-cells = <0>; > > @@ -79,6 +102,37 @@ > > }; > > }; > > > > + /* External CAN clock */ > > + can_clk: can { > > Doesn't look alphabetically to me...
Thanks, I have applied the following: From: Simon Horman <[email protected]> Subject: [PATCH] ARM: dts: r8a7743: sort root sub-nodes alphabetically Sort root sub-nodes alphabetically to allow for easier maintenance of this file. Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> --- arch/arm/boot/dts/r8a7743.dtsi | 100 ++++++++++++++++++++++------------------- 1 file changed, 54 insertions(+), 46 deletions(-) diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi index f24f36d50e40..067e339f6646 100644 --- a/arch/arm/boot/dts/r8a7743.dtsi +++ b/arch/arm/boot/dts/r8a7743.dtsi @@ -37,6 +37,37 @@ vin2 = &vin2; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency + * clocks by default. + * Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External CAN clock */ + can_clk: can { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -79,6 +110,29 @@ }; }; + /* External root clock */ + extal_clk: extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + /* External SCIF clock */ + scif_clk: scif { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overridden by the board. */ + clock-frequency = <0>; + }; + soc { compatible = "simple-bus"; interrupt-parent = <&gic>; @@ -1629,56 +1683,10 @@ clock-frequency = <0>; }; - /* - * The external audio clocks are configured as 0 Hz fixed frequency - * clocks by default. - * Boards that provide audio clocks should override them. - */ - audio_clk_a: audio_clk_a { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - audio_clk_b: audio_clk_b { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - audio_clk_c: audio_clk_c { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - /* External USB clock - can be overridden by the board */ usb_extal_clk: usb_extal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <48000000>; }; - - /* External CAN clock */ - can_clk: can { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; - - /* External PCIe clock - can be overridden by the board */ - pcie_bus_clk: pcie_bus { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; - - /* External SCIF clock */ - scif_clk: scif { - compatible = "fixed-clock"; - #clock-cells = <0>; - /* This value must be overridden by the board. */ - clock-frequency = <0>; - }; }; -- 2.11.0
