On Thu, Dec 07, 2017 at 06:55:40PM +0900, Yoshihiro Shimoda wrote: > This patch adds USB3.0 PHY node for r8a7796. > > Signed-off-by: Yoshihiro Shimoda <[email protected]> > --- > arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi > b/arch/arm64/boot/dts/renesas/r8a7796.dtsi > index cc0cca7c..cee50e8 100644 > --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi > @@ -166,6 +166,19 @@ > clock-frequency = <0>; > }; > > + /* External USB clocks - can be overridden by the board */ > + usb3s0_clk: usb3s0 { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <0>; > + }; > + > + usb_extal_clk: usb_extal { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <0>; > + }; > + > soc { > compatible = "simple-bus"; > interrupt-parent = <&gic>; > @@ -1419,6 +1432,19 @@ > status = "disabled"; > }; > > + usb3_phy0: usb-phy@e65ee000 { > + compatible = "renesas,r8a7796-usb3-phy", > + "renesas,rcar-gen3-usb3-phy"; > + reg = <0 0xe65ee000 0 0x90>; > + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, > + <&usb_extal_clk>; > + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; > + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; > + resets = <&cpg 328>; > + #phy-cells = <0>; > + status = "disabled"; > + }; > + > xhci0: usb@ee000000 { > compatible = "renesas,xhci-r8a7796", > "renesas,rcar-gen3-xhci";
Hi Shimoda-san, I have applied this patch with a minor update. * I shifted the _clk nodes to the bottom of the file to preserve alphabetical order of the sub-nodes of the root node. This ordering is new and probably was not the case when you submitted the patch. What I have applied is as follows: From: Yoshihiro Shimoda <[email protected]> Subject: [PATCH] arm64: dts: renesas: r8a7796: add usb3_phy node This patch adds USB3.0 PHY node for r8a7796. Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Simon Horman <[email protected]> --- arch/arm64/boot/dts/renesas/r8a7796.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index a339047acdc7..c5192d513d7d 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -1403,6 +1403,19 @@ status = "disabled"; }; + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7796-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a7796", "renesas,rcar-gen3-xhci"; @@ -2021,4 +2034,17 @@ }; }; }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; -- 2.11.0
