Based on previous work by Ryo Kataoka <[email protected]>.
Signed-off-by: Niklas Söderlund <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
* Changes since v1
- s/H3 and M3-W, M3-N/H3, M3-W and M3-N/
- Add review tags.
---
.../devicetree/bindings/thermal/rcar-gen3-thermal.txt | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
index fdf5caa6229b4fff..32c63ffef2e3a3ff 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
@@ -9,6 +9,7 @@ Required properties:
Examples with soctypes are:
- "renesas,r8a7795-thermal" (R-Car H3)
- "renesas,r8a7796-thermal" (R-Car M3-W)
+ - "renesas,r8a77965-thermal" (R-Car M3-N)
- reg : Address ranges of the thermal registers. Each sensor
needs one address range. Sorting must be done in
increasing order according to datasheet, i.e.
@@ -18,7 +19,7 @@ Required properties:
Optional properties:
-- interrupts : interrupts routed to the TSC (3 for H3 and M3-W)
+- interrupts : interrupts routed to the TSC (3 for H3, M3-W and M3-N)
- power-domain : Must contain a reference to the power domain. This
property is mandatory if the thermal sensor instance
is part of a controllable power domain.
--
2.17.0
