On Sun, Jun 10, 2018 at 09:24:13PM +0300, Sergei Shtylyov wrote:
> This PHY is still mostly undocumented -- the only documented registers
> exist on R-Car V3H (R8A77980) SoC where this PHY stays in a powered-down
> state after a reset and thus we must power it up for PCIe to work...
>
> Signed-off-by: Sergei Shtylyov <[email protected]>
>
> ---
> Changes in version 2:
> - split the bindings into their own patch;
> - fixed the PHY name in the heading comment;
> - removed 'rcar_gen3_phy_pcie_ops' and the generic R-Car gen3 PCIe PHY entry
> in
> rcar_gen3_phy_pcie_match_table[];
> - replaced the 'of_device_id::data' initializer with an explicit argument to
> devm_phy_create();
> - uppercased the acronym in the comment;
> - cleaned up the patch description.
>
> drivers/phy/renesas/Kconfig | 7 +
> drivers/phy/renesas/Makefile | 1
> drivers/phy/renesas/phy-rcar-gen3-pcie.c | 151
> +++++++++++++++++++++++++++++++
> 3 files changed, 159 insertions(+)
>
> Index: linux-phy/drivers/phy/renesas/Kconfig
> ===================================================================
> --- linux-phy.orig/drivers/phy/renesas/Kconfig
> +++ linux-phy/drivers/phy/renesas/Kconfig
> @@ -8,6 +8,13 @@ config PHY_RCAR_GEN2
> help
> Support for USB PHY found on Renesas R-Car generation 2 SoCs.
>
> +config PHY_RCAR_GEN3_PCIE
> + tristate "Renesas R-Car generation 3 PCIe PHY driver"
> + depends on ARCH_RENESAS
> + select GENERIC_PHY
> + help
> + Support for the PCIe PHY found on Renesas R-Car generation 3 SoCs.
> +
> config PHY_RCAR_GEN3_USB2
> tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> depends on ARCH_RENESAS
> Index: linux-phy/drivers/phy/renesas/Makefile
> ===================================================================
> --- linux-phy.orig/drivers/phy/renesas/Makefile
> +++ linux-phy/drivers/phy/renesas/Makefile
> @@ -1,3 +1,4 @@
> obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
> +obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o
> obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
> obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o
> Index: linux-phy/drivers/phy/renesas/phy-rcar-gen3-pcie.c
> ===================================================================
> --- /dev/null
> +++ linux-phy/drivers/phy/renesas/phy-rcar-gen3-pcie.c
> @@ -0,0 +1,151 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas R-Car Gen3 PCIe PHY driver
> + *
> + * Copyright (C) 2018 Cogent Embedded, Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/spinlock.h>
> +
> +#define PHY_CTRL 0x4000 /* R8A77980 only */
> +
> +/* PHY control register (PHY_CTRL) */
> +#define PHY_CTRL_PHY_PWDN 0x00000004
nit: Can you use BIT(2) ?
> +
> +struct rcar_gen3_phy {
> + struct phy *phy;
> + spinlock_t lock;
> + void __iomem *base;
> +};
> +
> +static void rcar_gen3_phy_pcie_modify_reg(struct phy *p, unsigned int reg,
> + u32 clear, u32 set)
> +{
> + struct rcar_gen3_phy *phy = phy_get_drvdata(p);
> + void __iomem *base = phy->base;
> + unsigned long flags;
> + u32 value;
> +
> + spin_lock_irqsave(&phy->lock, flags);
> +
> + value = readl(base + reg);
> + value &= ~clear;
> + value |= set;
> + writel(value, base + reg);
> +
> + spin_unlock_irqrestore(&phy->lock, flags);
> +}
> +
> +static int r8a77980_phy_pcie_power_on(struct phy *p)
> +{
> + /* Power on the PCIe PHY */
> + rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, PHY_CTRL_PHY_PWDN, 0);
> +
> + return 0;
> +}
> +
> +static int r8a77980_phy_pcie_power_off(struct phy *p)
> +{
> + /* Power off the PCIe PHY */
> + rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, 0, PHY_CTRL_PHY_PWDN);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops r8a77980_phy_pcie_ops = {
> + .power_on = r8a77980_phy_pcie_power_on,
> + .power_off = r8a77980_phy_pcie_power_off,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct of_device_id rcar_gen3_phy_pcie_match_table[] = {
> + { .compatible = "renesas,r8a77980-pcie-phy" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, rcar_gen3_phy_pcie_match_table);
> +
> +static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy_provider *provider;
> + struct rcar_gen3_phy *phy;
> + struct resource *res;
> + void __iomem *base;
> + int error;
> +
> + if (!dev->of_node) {
> + dev_err(dev,
> + "This driver must only be instantiated from the device
> tree\n");
> + return -EINVAL;
> + }
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + base = devm_ioremap_resource(dev, res);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> + if (!phy)
> + return -ENOMEM;
> +
> + spin_lock_init(&phy->lock);
> +
> + phy->base = base;
> +
> + /*
> + * devm_phy_create() will call pm_runtime_enable(&phy->dev);
> + * And then, phy-core will manage runtime PM for this device.
> + */
> + pm_runtime_enable(dev);
> +
> + phy->phy = devm_phy_create(dev, NULL, &r8a77980_phy_pcie_ops);
> + if (IS_ERR(phy->phy)) {
> + dev_err(dev, "Failed to create PCIe PHY\n");
> + error = PTR_ERR(phy->phy);
> + goto error;
> + }
> + phy_set_drvdata(phy->phy, phy);
> +
> + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> + if (IS_ERR(provider)) {
> + dev_err(dev, "Failed to register PHY provider\n");
> + error = PTR_ERR(provider);
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + pm_runtime_disable(dev);
> +
> + return error;
> +}
> +
> +static int rcar_gen3_phy_pcie_remove(struct platform_device *pdev)
> +{
> + pm_runtime_disable(&pdev->dev);
> +
> + return 0;
> +};
> +
> +static struct platform_driver rcar_gen3_phy_driver = {
> + .driver = {
> + .name = "phy_rcar_gen3_pcie",
> + .of_match_table = rcar_gen3_phy_pcie_match_table,
> + },
> + .probe = rcar_gen3_phy_pcie_probe,
> + .remove = rcar_gen3_phy_pcie_remove,
> +};
> +
> +module_platform_driver(rcar_gen3_phy_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Renesas R-Car Gen3 PCIe PHY");
> +MODULE_AUTHOR("Sergei Shtylyov <[email protected]>");
>
