On Mon, Jun 11, 2018 at 10:06:51AM +0200, Simon Horman wrote:
> On Sun, Jun 10, 2018 at 09:24:13PM +0300, Sergei Shtylyov wrote:
> > This PHY is still mostly undocumented -- the only documented registers
> > exist on R-Car V3H (R8A77980) SoC where this PHY stays in a powered-down
> > state after a reset and thus we must power it up for PCIe to work...
> >
> > Signed-off-by: Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>
Nit below notwithstanding
Reviewed-by: Simon Horman <horms+rene...@verge.net.au>
> >
> > ---
> > Changes in version 2:
> > - split the bindings into their own patch;
> > - fixed the PHY name in the heading comment;
> > - removed 'rcar_gen3_phy_pcie_ops' and the generic R-Car gen3 PCIe PHY
> > entry in
> > rcar_gen3_phy_pcie_match_table[];
> > - replaced the 'of_device_id::data' initializer with an explicit argument to
> > devm_phy_create();
> > - uppercased the acronym in the comment;
> > - cleaned up the patch description.
> >
> > drivers/phy/renesas/Kconfig | 7 +
> > drivers/phy/renesas/Makefile | 1
> > drivers/phy/renesas/phy-rcar-gen3-pcie.c | 151
> > +++++++++++++++++++++++++++++++
> > 3 files changed, 159 insertions(+)
> >
> > Index: linux-phy/drivers/phy/renesas/Kconfig
> > ===================================================================
> > --- linux-phy.orig/drivers/phy/renesas/Kconfig
> > +++ linux-phy/drivers/phy/renesas/Kconfig
> > @@ -8,6 +8,13 @@ config PHY_RCAR_GEN2
> > help
> > Support for USB PHY found on Renesas R-Car generation 2 SoCs.
> >
> > +config PHY_RCAR_GEN3_PCIE
> > + tristate "Renesas R-Car generation 3 PCIe PHY driver"
> > + depends on ARCH_RENESAS
> > + select GENERIC_PHY
> > + help
> > + Support for the PCIe PHY found on Renesas R-Car generation 3 SoCs.
> > +
> > config PHY_RCAR_GEN3_USB2
> > tristate "Renesas R-Car generation 3 USB 2.0 PHY driver"
> > depends on ARCH_RENESAS
> > Index: linux-phy/drivers/phy/renesas/Makefile
> > ===================================================================
> > --- linux-phy.orig/drivers/phy/renesas/Makefile
> > +++ linux-phy/drivers/phy/renesas/Makefile
> > @@ -1,3 +1,4 @@
> > obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
> > +obj-$(CONFIG_PHY_RCAR_GEN3_PCIE) += phy-rcar-gen3-pcie.o
> > obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o
> > obj-$(CONFIG_PHY_RCAR_GEN3_USB3) += phy-rcar-gen3-usb3.o
> > Index: linux-phy/drivers/phy/renesas/phy-rcar-gen3-pcie.c
> > ===================================================================
> > --- /dev/null
> > +++ linux-phy/drivers/phy/renesas/phy-rcar-gen3-pcie.c
> > @@ -0,0 +1,151 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Renesas R-Car Gen3 PCIe PHY driver
> > + *
> > + * Copyright (C) 2018 Cogent Embedded, Inc.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/spinlock.h>
> > +
> > +#define PHY_CTRL 0x4000 /* R8A77980 only */
> > +
> > +/* PHY control register (PHY_CTRL) */
> > +#define PHY_CTRL_PHY_PWDN 0x00000004
>
> nit: Can you use BIT(2) ?
>
> > +
> > +struct rcar_gen3_phy {
> > + struct phy *phy;
> > + spinlock_t lock;
> > + void __iomem *base;
> > +};
> > +
> > +static void rcar_gen3_phy_pcie_modify_reg(struct phy *p, unsigned int reg,
> > + u32 clear, u32 set)
> > +{
> > + struct rcar_gen3_phy *phy = phy_get_drvdata(p);
> > + void __iomem *base = phy->base;
> > + unsigned long flags;
> > + u32 value;
> > +
> > + spin_lock_irqsave(&phy->lock, flags);
> > +
> > + value = readl(base + reg);
> > + value &= ~clear;
> > + value |= set;
> > + writel(value, base + reg);
> > +
> > + spin_unlock_irqrestore(&phy->lock, flags);
> > +}
> > +
> > +static int r8a77980_phy_pcie_power_on(struct phy *p)
> > +{
> > + /* Power on the PCIe PHY */
> > + rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, PHY_CTRL_PHY_PWDN, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static int r8a77980_phy_pcie_power_off(struct phy *p)
> > +{
> > + /* Power off the PCIe PHY */
> > + rcar_gen3_phy_pcie_modify_reg(p, PHY_CTRL, 0, PHY_CTRL_PHY_PWDN);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct phy_ops r8a77980_phy_pcie_ops = {
> > + .power_on = r8a77980_phy_pcie_power_on,
> > + .power_off = r8a77980_phy_pcie_power_off,
> > + .owner = THIS_MODULE,
> > +};
> > +
> > +static const struct of_device_id rcar_gen3_phy_pcie_match_table[] = {
> > + { .compatible = "renesas,r8a77980-pcie-phy" },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, rcar_gen3_phy_pcie_match_table);
> > +
> > +static int rcar_gen3_phy_pcie_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct phy_provider *provider;
> > + struct rcar_gen3_phy *phy;
> > + struct resource *res;
> > + void __iomem *base;
> > + int error;
> > +
> > + if (!dev->of_node) {
> > + dev_err(dev,
> > + "This driver must only be instantiated from the device
> > tree\n");
> > + return -EINVAL;
> > + }
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + base = devm_ioremap_resource(dev, res);
> > + if (IS_ERR(base))
> > + return PTR_ERR(base);
> > +
> > + phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> > + if (!phy)
> > + return -ENOMEM;
> > +
> > + spin_lock_init(&phy->lock);
> > +
> > + phy->base = base;
> > +
> > + /*
> > + * devm_phy_create() will call pm_runtime_enable(&phy->dev);
> > + * And then, phy-core will manage runtime PM for this device.
> > + */
> > + pm_runtime_enable(dev);
> > +
> > + phy->phy = devm_phy_create(dev, NULL, &r8a77980_phy_pcie_ops);
> > + if (IS_ERR(phy->phy)) {
> > + dev_err(dev, "Failed to create PCIe PHY\n");
> > + error = PTR_ERR(phy->phy);
> > + goto error;
> > + }
> > + phy_set_drvdata(phy->phy, phy);
> > +
> > + provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> > + if (IS_ERR(provider)) {
> > + dev_err(dev, "Failed to register PHY provider\n");
> > + error = PTR_ERR(provider);
> > + goto error;
> > + }
> > +
> > + return 0;
> > +
> > +error:
> > + pm_runtime_disable(dev);
> > +
> > + return error;
> > +}
> > +
> > +static int rcar_gen3_phy_pcie_remove(struct platform_device *pdev)
> > +{
> > + pm_runtime_disable(&pdev->dev);
> > +
> > + return 0;
> > +};
> > +
> > +static struct platform_driver rcar_gen3_phy_driver = {
> > + .driver = {
> > + .name = "phy_rcar_gen3_pcie",
> > + .of_match_table = rcar_gen3_phy_pcie_match_table,
> > + },
> > + .probe = rcar_gen3_phy_pcie_probe,
> > + .remove = rcar_gen3_phy_pcie_remove,
> > +};
> > +
> > +module_platform_driver(rcar_gen3_phy_driver);
> > +
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_DESCRIPTION("Renesas R-Car Gen3 PCIe PHY");
> > +MODULE_AUTHOR("Sergei Shtylyov <sergei.shtyl...@cogentembedded.com>");
> >
>
