Hi Chris,
On Fri, Sep 7, 2018 at 6:59 PM Chris Brandt <chris.bra...@renesas.com> wrote:
> Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
> Standby.
>
> The Module Standby HW in the RZ/A series is very close to R-Car HW, except
> for how the registers are laid out.
> The MSTP registers are only 8-bits wide, there is no status registers
> (MSTPSR), and the register offsets are a little different. Since the RZ/A
> hardware manuals refer to these registers as the Standby Control Registers,
> we'll use that name to distinguish the RZ/A type from the R-Car type.
>
> Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
> ---
> v4:
> * Preserved sort order of SoC listings
> * Removed R7S9210_CLK_PLL from dt-binding since it's an internal clock
> * ratio_tab is now a struct making it look a little nicer
> * Removed CLK_I,...CLK_P0 because they are already defined in dt-bindings
> * Sorted mod_clks by ascending MSTP number
> * Removed cast from clk_get_rate(parent)
> * Corrected register index of stbcr[1]
> * Don't use MOD_CLK_PACK_10 for non priv->stbyctrl devices (bug fix)
Thanks for the update!
Reviewed-by: Geert Uytterhoeven <geert+rene...@glider.be>
i.e. will queue in clk-renesas-for-v4.20.
One possible area for improvement is removing the unused entries in the
module clocks part of the priv->clks[] array:
+ .num_hw_mod_clks = 11 * 32, /* includes STBCR0 which doesn't exist */
Due to having 8-bit instead of 32-bit registers, 11 * 24 entries are not used.
Fixing that means adding more checks in several functions, though, so I
don't know if you want to go that far...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
