On Fri, Sep 07, 2018 at 11:58:49AM -0500, Chris Brandt wrote:
> Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
> Standby.
>
> The Module Standby HW in the RZ/A series is very close to R-Car HW, except
> for how the registers are laid out.
> The MSTP registers are only 8-bits wide, there is no status registers
> (MSTPSR), and the register offsets are a little different. Since the RZ/A
> hardware manuals refer to these registers as the Standby Control Registers,
> we'll use that name to distinguish the RZ/A type from the R-Car type.
>
> Signed-off-by: Chris Brandt <chris.bra...@renesas.com>
> ---
> v4:
> * Preserved sort order of SoC listings
> * Removed R7S9210_CLK_PLL from dt-binding since it's an internal clock
> * ratio_tab is now a struct making it look a little nicer
> * Removed CLK_I,...CLK_P0 because they are already defined in dt-bindings
> * Sorted mod_clks by ascending MSTP number
> * Removed cast from clk_get_rate(parent)
> * Corrected register index of stbcr[1]
> * Don't use MOD_CLK_PACK_10 for non priv->stbyctrl devices (bug fix)
> v3:
> * Use actual register bit names and numbers from manual for both DT and
> tables ("36" instead of "306")
> * Do not register reset controller for stbyctrl (RZ/A) SoCs
> * Changed SPDX from "GPL-2.0+" to "GPL-2.0"
> v2:
> * num_hw_mod_clks was wrong
> * added ethernet clocks
> ---
> .../devicetree/bindings/clock/renesas,cpg-mssr.txt | 5 +-
> drivers/clk/renesas/Kconfig | 5 +
> drivers/clk/renesas/Makefile | 1 +
> drivers/clk/renesas/r7s9210-cpg-mssr.c | 189
> +++++++++++++++++++++
> drivers/clk/renesas/renesas-cpg-mssr.c | 81 +++++++--
> drivers/clk/renesas/renesas-cpg-mssr.h | 13 ++
> include/dt-bindings/clock/r7s9210-cpg-mssr.h | 20 +++
For DT bits,
Acked-by: Rob Herring <r...@kernel.org>
> 7 files changed, 300 insertions(+), 14 deletions(-)
> create mode 100644 drivers/clk/renesas/r7s9210-cpg-mssr.c
> create mode 100644 include/dt-bindings/clock/r7s9210-cpg-mssr.h
