On Mon, Sep 10, 2018 at 03:04:56PM +0300, Sergei Shtylyov wrote:
> Hello!
>
> On 09/10/2018 12:23 PM, Simon Horman wrote:
>
> >> Describe TMUs in the R8A779{7|8}0 device trees.
> >>
> >> Based on the original (and large) patches by Vladimir Barinov.
> >>
> >> Signed-off-by: Vladimir Barinov <[email protected]>
> >> Signed-off-by: Sergei Shtylyov <[email protected]>
> >>
> >> ---
> >> This patch is against the 'renesas-devel-20180906-v4.19-rc2' branch of
> >> Simon Horman's 'renesas.git' repo plus the R8A779{7|8}0 DT patch adding
> >> the CMT support).
> >>
> >> The R8A779{7|8}0 TMU DT binding update have been just posted...
> >>
> >> arch/arm64/boot/dts/renesas/r8a77970.dtsi | 66
> >> ++++++++++++++++++++++++++++++
> >> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 66
> >> ++++++++++++++++++++++++++++++
> >> 2 files changed, 132 insertions(+)
> >>
> >> Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> >> ===================================================================
> >> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> >> +++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
> >> @@ -316,6 +316,72 @@
> >> resets = <&cpg 407>;
> >> };
> >>
> >> + tmu0: timer@e61e0000 {
> >> + compatible = "renesas,tmu-r8a77970", "renesas,tmu";
> >> + reg = <0 0xe61e0000 0 0x30>;
> >> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 125>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> >> + resets = <&cpg 125>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu1: timer@e6fc0000 {
> >> + compatible = "renesas,tmu-r8a77970", "renesas,tmu";
> >> + reg = <0 0xe6fc0000 0 0x30>;
> >> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 124>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> >> + resets = <&cpg 124>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu2: timer@e6fd0000 {
> >> + compatible = "renesas,tmu-r8a77970", "renesas,tmu";
> >> + reg = <0 0xe6fd0000 0 0x30>;
> >> + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> >
> > Should GIC_SPI 306 also be here for TMU 2 channel 3?>
> > And likewise for the r8a77980 (V3H)
>
> There are only 3 channels per TMU according to the beginning of the TMU
> chapter.
>
> > The documentation seems inconsistent as I see this listed in the
> > interrupt controller documentation. But I do not see that channel
> > documented in the TMU documentation.
>
> Right!
>
> >> + clocks = <&cpg CPG_MOD 123>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> >> + resets = <&cpg 123>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu3: timer@e6fe0000 {
> >> + compatible = "renesas,tmu-r8a7797", "renesas,tmu";
> >> + reg = <0 0xe6fe0000 0 0x30>;
> >> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 122>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> >> + resets = <&cpg 122>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu4: timer@ffc00000 {
> >> + compatible = "renesas,tmu-r8a7797", "renesas,tmu";
> >> + reg = <0 0xffc00000 0 0x30>;
> >> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
> >
> > Should GIC_SPI 369 for TMU 4 channel 3 be present not here for
> > the r8a77970 (V3M) but rather below for the r8a77980 (V3H) ?
>
> I don't think it should be pesent in either place, and I thought I had
> removed
> the 4th IRQ from every node before posting... :-/
>
> > As per my note above, the documentation seems inconsistent here.
>
> Yes.
Lets go with no 4th IRQ anywhere :)
Could you send an updated patch?
>
> >> + clocks = <&cpg CPG_MOD 121>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
> >> + resets = <&cpg 121>;
> >> + status = "disabled";
> >> + };
> >> +
> >> i2c0: i2c@e6500000 {
> >> compatible = "renesas,i2c-r8a77970",
> >> "renesas,rcar-gen3-i2c";
> >> Index: renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> >> ===================================================================
> >> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> >> +++ renesas/arch/arm64/boot/dts/renesas/r8a77980.dtsi
> >> @@ -346,6 +346,72 @@
> >> resets = <&cpg 407>;
> >> };
> >>
> >> + tmu0: timer@e61e0000 {
> >> + compatible = "renesas,tmu-r8a77980", "renesas,tmu";
> >> + reg = <0 0xe61e0000 0 0x30>;
> >> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 125>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> >> + resets = <&cpg 125>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu1: timer@e6fc0000 {
> >> + compatible = "renesas,tmu-r8a77980", "renesas,tmu";
> >> + reg = <0 0xe6fc0000 0 0x30>;
> >> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
>
> Hadn't removed this apparently as well...
>
> >> + clocks = <&cpg CPG_MOD 124>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> >> + resets = <&cpg 124>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu2: timer@e6fd0000 {
> >> + compatible = "renesas,tmu-r8a77980", "renesas,tmu";
> >> + reg = <0 0xe6fd0000 0 0x30>;
> >> + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 123>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> >> + resets = <&cpg 123>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu3: timer@e6fe0000 {
> >> + compatible = "renesas,tmu-r8a77980", "renesas,tmu";
> >> + reg = <0 0xe6fe0000 0 0x30>;
> >> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 122>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> >> + resets = <&cpg 122>;
> >> + status = "disabled";
> >> + };
> >> +
> >> + tmu4: timer@ffc00000 {
> >> + compatible = "renesas,tmu-r8a77980", "renesas,tmu";
> >> + reg = <0 0xffc00000 0 0x30>;
> >> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
> >> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> >> + clocks = <&cpg CPG_MOD 121>;
> >> + clock-names = "fck";
> >> + power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
> >> + resets = <&cpg 121>;
> >> + status = "disabled";
> >> + };
> >> +
> >> i2c0: i2c@e6500000 {
> >> compatible = "renesas,i2c-r8a77980",
> >> "renesas,rcar-gen3-i2c";
> >>
>
> MBR, Sergei
>
