On 09/12/2018 12:39 PM, Simon Horman wrote:
>>>>>> Describe TMUs in the R8A779{7|8}0 device trees.
>>>>>>
>>>>>> Based on the original (and large) patches by Vladimir Barinov.
>>>>>>
>>>>>> Signed-off-by: Vladimir Barinov <[email protected]>
>>>>>> Signed-off-by: Sergei Shtylyov <[email protected]>
>>>>>>
>>>>>> ---
>>>>>> This patch is against the 'renesas-devel-20180906-v4.19-rc2' branch of
>>>>>> Simon Horman's 'renesas.git' repo plus the R8A779{7|8}0 DT patch adding
>>>>>> the CMT support).
>>>>>>
>>>>>> The R8A779{7|8}0 TMU DT binding update have been just posted...
>>>>>>
>>>>>> arch/arm64/boot/dts/renesas/r8a77970.dtsi | 66
>>>>>> ++++++++++++++++++++++++++++++
>>>>>> arch/arm64/boot/dts/renesas/r8a77980.dtsi | 66
>>>>>> ++++++++++++++++++++++++++++++
>>>>>> 2 files changed, 132 insertions(+)
>>>>>>
>>>>>> Index: renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
>>>>>> ===================================================================
>>>>>> --- renesas.orig/arch/arm64/boot/dts/renesas/r8a77970.dtsi
>>>>>> +++ renesas/arch/arm64/boot/dts/renesas/r8a77970.dtsi
>>>>>> @@ -316,6 +316,72 @@
>>>>>> resets = <&cpg 407>;
>>>>>> };
>>>>>>
>>>>>> + tmu0: timer@e61e0000 {
>>>>>> + compatible = "renesas,tmu-r8a77970",
>>>>>> "renesas,tmu";
>>>>>> + reg = <0 0xe61e0000 0 0x30>;
>>>>>> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> + clocks = <&cpg CPG_MOD 125>;
>>>>>> + clock-names = "fck";
>>>>>> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>>>> + resets = <&cpg 125>;
>>>>>> + status = "disabled";
>>>>>> + };
>>>>>> +
>>>>>> + tmu1: timer@e6fc0000 {
>>>>>> + compatible = "renesas,tmu-r8a77970",
>>>>>> "renesas,tmu";
>>>>>> + reg = <0 0xe6fc0000 0 0x30>;
>>>>>> + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> + clocks = <&cpg CPG_MOD 124>;
>>>>>> + clock-names = "fck";
>>>>>> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>>>> + resets = <&cpg 124>;
>>>>>> + status = "disabled";
>>>>>> + };
>>>>>> +
>>>>>> + tmu2: timer@e6fd0000 {
>>>>>> + compatible = "renesas,tmu-r8a77970",
>>>>>> "renesas,tmu";
>>>>>> + reg = <0 0xe6fd0000 0 0x30>;
>>>>>> + interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
>>>>>
>>>>> Should GIC_SPI 306 also be here for TMU 2 channel 3?>
>>>>> And likewise for the r8a77980 (V3H)
>>>>
>>>> There are only 3 channels per TMU according to the beginning of the TMU
>>>> chapter.
>>>>
>>>>> The documentation seems inconsistent as I see this listed in the
>>>>> interrupt controller documentation. But I do not see that channel
>>>>> documented in the TMU documentation.
>>>>
>>>> Right!
>>>>
>>>>>> + clocks = <&cpg CPG_MOD 123>;
>>>>>> + clock-names = "fck";
>>>>>> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>>>> + resets = <&cpg 123>;
>>>>>> + status = "disabled";
>>>>>> + };
>>>>>> +
>>>>>> + tmu3: timer@e6fe0000 {
>>>>>> + compatible = "renesas,tmu-r8a7797",
>>>>>> "renesas,tmu";
>>>>>> + reg = <0 0xe6fe0000 0 0x30>;
>>>>>> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
>>>>>> + clocks = <&cpg CPG_MOD 122>;
>>>>>> + clock-names = "fck";
>>>>>> + power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
>>>>>> + resets = <&cpg 122>;
>>>>>> + status = "disabled";
>>>>>> + };
>>>>>> +
>>>>>> + tmu4: timer@ffc00000 {
>>>>>> + compatible = "renesas,tmu-r8a7797",
>>>>>> "renesas,tmu";
>>>>>> + reg = <0 0xffc00000 0 0x30>;
>>>>>> + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
>>>>>> + <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
>>>>>
>>>>> Should GIC_SPI 369 for TMU 4 channel 3 be present not here for
>>>>> the r8a77970 (V3M) but rather below for the r8a77980 (V3H) ?
>>>>
>>>> I don't think it should be pesent in either place, and I thought I had
>>>> removed
>>>> the 4th IRQ from every node before posting... :-/
>>>>
>>>>> As per my note above, the documentation seems inconsistent here.
>>>>
>>>> Yes.
>>>
>>> Lets go with no 4th IRQ anywhere :)
>>
>> After having studied the manual, 4th IRQ might have sometging to do with
>> the input capture channel capability which uses an extra IRQ output.
>>
>>> Could you send an updated patch?
>>
>> Sure. I'll verify and repost.
>
> Geert seems to want us to consider this further.
Geert's main concern is about the different TMU hardware on the same SoC,
like
the CMT types 0/1 (each described in its separate chapter). Somehow we don't
have
the same situation with TMUs...
> As DT describes hardware it seems reasonable that we should describe the
> TMU device fully in DT, including all IRQs. But it seems to me that the
> documentation may not be consistent enough to judge how to do that.
> So perhaps a way forwards is to seek clarification of the documentation?
Yes, definitely won't hurts. :-)
MBR, Sergei
