On Sun, Nov 04, 2018 at 09:37:07PM +0100, Marek Vasut wrote: > The eMMC card has two supplies, VCC and VCCQ. The VCC supplies the NAND > array and the VCCQ supplies the bus. On Salvator-X and ULCB, the VCC is > connected to 3.3V rail, while the VCCQ is connected to 1.8V rail. Adjust > the pinmux to match the bus, which is always operating in 1.8V mode. > > While at it, deduplicate the pinmux entries, which are now the same for > both default and UHS modes. We still need the two pinctrl entries to > match the bindings though. > > Signed-off-by: Marek Vasut <[email protected]> > Cc: Geert Uytterhoeven <[email protected]> > Cc: Simon Horman <[email protected]> > Cc: Wolfram Sang <[email protected]> > Cc: Yoshihiro Shimoda <[email protected]> > Cc: [email protected] > Cc: [email protected]
Tested on M3-N and H3 ES2.0 with HS400 enabled eMMC: Reviewed-by: Wolfram Sang <[email protected]> Tested-by: Wolfram Sang <[email protected]>
signature.asc
Description: PGP signature
