Hi Chris,
On Thu, Nov 29, 2018 at 2:07 PM Chris Brandt <[email protected]> wrote:
> Basic support for the RZ/A2 (R7S9210) SoC.
>
> Signed-off-by: Chris Brandt <[email protected]>
Thanks for your patch!
> --- /dev/null
> +++ b/arch/arm/boot/dts/r7s9210.dtsi
> @@ -0,0 +1,211 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the R7S9210 SoC
> + *
> + * Copyright (C) 2018 Renesas Electronics Corporation
> + *
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/r7s9210-cpg-mssr.h>
> +
> +/ {
> + clocks {
Please remove the clocks subnode.
These days clocks live at the root node.
> + gic: interrupt-controller@e8221000 {
> + compatible = "arm,gic-400";
> + #interrupt-cells = <3>;
> + #address-cells = <0>;
> + interrupt-controller;
> + reg = <0xe8221000 0x1000>,
> + <0xe8222000 0x1000>;
> + };
> +
> + L2: cache-controller@1f003000 {
Please sort nodes by address (per group of devices).
> + compatible = "arm,pl310-cache";
> + reg = <0x1f003000 0x1000>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + arm,early-bresp-disable;
> + arm,full-line-zero-disable;
> + cache-unified;
> + cache-level = <2>;
> + };
> +
> + cpg: clock-controller@fcfe0020 {
fcfe0010, as pointed out by Simon.
> + compatible = "renesas,r7s9210-cpg-mssr";
> + reg = <0xfcfe0010 0x455>;
> + clocks = <&extal_clk>;
> + clock-names = "extal";
> + #clock-cells = <2>;
> + #power-domain-cells = <0>;
> + #reset-cells = <1>;
Note that resets are not yet supported by the driver.
But probably they will use #reset-cells = <1>, if ever implemented.
> + };
> +
> + ostm0: timer@e803b000 {
> + compatible = "renesas,r7s9210-ostm", "renesas,ostm";
> + reg = <0xe803b000 0x30>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&cpg CPG_MOD 36>;
> + clock-names = "ostm0";
The clock-names property is not documented in the DT bindings.
Moreover, using different names for the clock inputs of the different
channels is strange.
> + scif0: serial@e8007000 {
> + compatible = "renesas,scif-r7s9210";
> + reg = <0xe8007000 18>;
0x18 (for all scif instances)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
