On Thu, Nov 29, 2018 at 08:05:59AM -0500, Chris Brandt wrote:
> Add support for Renesas RZ/A2M evaluation board.
>
> Signed-off-by: Chris Brandt <[email protected]>
> ---
> Documentation/devicetree/bindings/arm/shmobile.txt | 2 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/r7s9210-rza2mevb.dts | 133
> +++++++++++++++++++++
> 3 files changed, 136 insertions(+)
> create mode 100644 arch/arm/boot/dts/r7s9210-rza2mevb.dts
>
> diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt
> b/Documentation/devicetree/bindings/arm/shmobile.txt
> index a94db59d8e2d..67a6810c4345 100644
> --- a/Documentation/devicetree/bindings/arm/shmobile.txt
> +++ b/Documentation/devicetree/bindings/arm/shmobile.txt
> @@ -125,6 +125,8 @@ Boards:
> compatible = "renesas,porter", "renesas,r8a7791"
> - RSKRZA1 (YR0K77210C000BE)
> compatible = "renesas,rskrza1", "renesas,r7s72100"
> + - RZ/A2M Eval Board (RTK7921053S00000BE)
> + compatible = "renesas,rza2mevb", "renesas,r7s9210"
> - RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
> compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"
> - Salvator-X (RTP0RC7795SIPB0010S)
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b0e966d625b9..fbdd068fd8af 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -824,6 +824,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
> r7s72100-genmai.dtb \
> r7s72100-gr-peach.dtb \
> r7s72100-rskrza1.dtb \
> + r7s9210-rza2mevb.dtb \
> r8a73a4-ape6evm.dtb \
> r8a7740-armadillo800eva.dtb \
> r8a7743-iwg20d-q7.dtb \
> diff --git a/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> new file mode 100644
> index 000000000000..9570aeb8f1ce
> --- /dev/null
> +++ b/arch/arm/boot/dts/r7s9210-rza2mevb.dts
> @@ -0,0 +1,133 @@
> +/*
> + * Device Tree Source for the RZA2MEVB board
> + *
> + * Copyright (C) 2018 Renesas Electronics
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + * a) This file is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of the
> + * License, or (at your option) any later version.
> + *
> + * This file is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + * b) Permission is hereby granted, free of charge, to any person
> + * obtaining a copy of this software and associated documentation
> + * files (the "Software"), to deal in the Software without
> + * restriction, including without limitation the rights to use,
> + * copy, modify, merge, publish, distribute, sublicense, and/or
> + * sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following
> + * conditions:
> + *
> + * The above copyright notice and this permission notice shall be
> + * included in all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "r7s9210.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/r7s9210-pinctrl.h>
> +
> +/ {
> + model = "RZA2MEVB";
> + compatible = "renesas,rza2mevb", "renesas,r7s9210";
> +
> + aliases {
> + serial0 = &scif4;
> + };
> +
> + chosen {
> + bootargs = "ignore_loglevel earlycon rootfstype=cramfs
> root=mtd:rootfs";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory@80000000 {
Wrong unit-address.
> + device_type = "memory";
> + reg = <0x40000000 0x00800000>; /* HyperRAM */
> + };
> +
> + lbsc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + leds {
> + status = "okay";
gpio-leds shouldn't need this as it shouldn't be in the SoC file.
> + compatible = "gpio-leds";
> +
> + led0 {
> + gpios = <&pinctrl RZA2_PIN(PORT6, 0) GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + /* Cramfs XIP File System in QSPI */
> + qspi@20000000 {
> + compatible = "mtd-rom";
This should be the actual Quad-SPI controller and then a flash device
underneath it. It may work as-is initially, but eventually won't you
need the flash details?
> + probe-type = "direct-mapped"; /* XIP from QSPI */
> + reg = <0x20000000 0x4000000>; /* 64 MB*/
> + bank-width = <4>;
> + device-width = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + partition@800000 {
Best practice is grouping under a 'partitions' node.
> + label ="rootfs";
> + reg = <0x0800000 0x1000000>; /* 16MB @ 0x20800000 */
> + read-only;
> + };
> + };
