Hi Hoan,
Thanks for your work.
Sorry for very late review, somehow this got lost in my inbox.
On 2018-11-06 15:08:26 +0900, Nguyen An Hoan wrote:
> From: Hoan Nguyen An <na-h...@jinso.co.jp>
>
> According to the hardware manual, Gen3 supports Standby/Reset mode.
> Add this function, and we should use this function while suspend
> to reduce the energy consumption.
>
> Signed-off-by: Hoan Nguyen An <na-h...@jinso.co.jp>
Nice clean commit and matches the datasheet,
Reviewed-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
Interrupts fire both before and after suspending as expected,
Tested-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
> ---
> drivers/thermal/rcar_gen3_thermal.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/thermal/rcar_gen3_thermal.c
> b/drivers/thermal/rcar_gen3_thermal.c
> index 7aed533..e654519 100644
> --- a/drivers/thermal/rcar_gen3_thermal.c
> +++ b/drivers/thermal/rcar_gen3_thermal.c
> @@ -447,11 +447,32 @@ static int rcar_gen3_thermal_probe(struct
> platform_device *pdev)
> return ret;
> }
>
> +static int rcar_gen3_thermal_reset(struct rcar_gen3_thermal_priv* priv)
> +{
> + unsigned int i;
> + u32 reg_val;
> +
> + for (i = 0; i < priv->num_tscs; i++) {
> + struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
> +
> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, 0);
> + rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
> +
> + reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
> + rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val &
> ~THCTR_THSST);
> + }
> +
> + usleep_range(1000, 2000);
> +
> + return 0;
> +}
> +
> static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
> {
> struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
>
> - rcar_thermal_irq_set(priv, false);
> + /* Reset to enter standby mode */
> + rcar_gen3_thermal_reset(priv);
>
> return 0;
> }
> --
> 2.7.4
>
--
Regards,
Niklas Söderlund
