On Thu, Apr 11, 2019 at 04:54:11PM +0900, Cao Van Dong wrote:
> Add vsp nodes to dtsi for VSP support on the RZ/G1C (r8a77470) SoC.
>
> Signed-off-by: Cao Van Dong <cv-d...@jinso.co.jp>
> ---
> arch/arm/boot/dts/r8a77470.dtsi | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
> index ae1dba0..2540bca 100644
> --- a/arch/arm/boot/dts/r8a77470.dtsi
> +++ b/arch/arm/boot/dts/r8a77470.dtsi
> @@ -1113,6 +1113,24 @@
> status = "disabled";
> };
>
> + vsp@fe928000 {
> + compatible = "renesas,vsp1";
> + reg = <0 0xfe928000 0 0x8000>;
> + interrupts = <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 131>;
> + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
> + resets = <&cpg 131>;
> + };
> +
> + vsp@fe930000 {
> + compatible = "renesas,vsp1";
> + reg = <0 0xfe930000 0 0x8000>;
> + interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 128>;
> + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
> + resets = <&cpg 128>;
> + };
> +
Nodes should be sorted by
1. Bus address
2. IP block tupe
So the above vsp nodes should go after sd@ee100000.
Otherwise this patch looks good to me.
> sdhi0: sd@ee100000 {
> compatible = "renesas,sdhi-r8a77470",
> "renesas,rcar-gen2-sdhi";
> --
> 2.7.4
>
