Hi Dong-san,
On Thu, Apr 11, 2019 at 04:54:12PM +0900, Cao Van Dong wrote:
> Add fdp1 node to dtsi for FDP1 support on the RZ/G1C (r8a77470) SoC.
>
> Signed-off-by: Cao Van Dong <[email protected]>
> ---
> arch/arm/boot/dts/r8a77470.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a77470.dtsi b/arch/arm/boot/dts/r8a77470.dtsi
> index 2540bca..7881516 100644
> --- a/arch/arm/boot/dts/r8a77470.dtsi
> +++ b/arch/arm/boot/dts/r8a77470.dtsi
> @@ -1131,6 +1131,15 @@
> resets = <&cpg 128>;
> };
>
> + fdp1@fe940000 {
> + compatible = "renesas,fdp1";
> + reg = <0 0xfe940000 0 0x2400>;
> + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 119>;
> + power-domains = <&sysc R8A77470_PD_ALWAYS_ON>;
> + resets = <&cpg 119>;
> + };
> +
Nodes should be sorted by
1. Bus address
2. IP block tupe
So the above vsp nodes should not go before sd@ee100000.
Otherwise this patch looks good to me.
> sdhi0: sd@ee100000 {
> compatible = "renesas,sdhi-r8a77470",
> "renesas,rcar-gen2-sdhi";
> --
> 2.7.4
>
