Dear Morimoto-san
Sorry for delay in this:
On 2018/09/07 17:59, Kuninori Morimoto wrote:
Hi Nguyen
Thank you for your patch
From: Hoan Nguyen An <na-h...@jinso.co.jp>
This patch adds Audio device nodes for the R8A77995
Signed-off-by: Hoan Nguyen An <na-h...@jinso.co.jp>
---
(snip)
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
I understand D3 only has SSI3, SSI4, SRC5, SRC6. But if I omitted the
attributes that D3 does not support (as SSI0,1,2,5,6,7,8,9),
although the sound-driver can probe but cannot play audio file,
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1011>, <&cpg CPG_MOD 1012>,
+ <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+
+ clock-names = "ssi-all",
+ "ssi.4", "ssi.3",
+ "src.6", "src.5",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_i";
And if I stay the same, ssi9,8,7,6,5,2,1,0 D3 does not support so CPG
will be 1005 (BIT5) corresponding
to SSI (all), similar to SCU (src9, 8,7,4,3,2,1,0) corresponds to 1017
(BIT17) SCU (all).
I tested and Sound operates in normally as follows
+ clocks = <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1005>, <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1005>, <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1005>, <&cpg CPG_MOD 1011>,
+ <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1005>, <&cpg CPG_MOD 1005>,
+ <&cpg CPG_MOD 1017>, <&cpg CPG_MOD 1017>,
+ <&cpg CPG_MOD 1017>, <&cpg CPG_MOD 1025>,
+ <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1017>,
+ <&cpg CPG_MOD 1017>, <&cpg CPG_MOD 1017>,
+ <&cpg CPG_MOD 1017>, <&cpg CPG_MOD 1017>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
+ <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+ <&audio_clk_a>, <&audio_clk_b>,
+ <&cpg CPG_CORE R8A77995_CLK_ZA2>;
+
+ clock-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0",
+ "src.9", "src.8", "src.7", "src.6",
+ "src.5", "src.4", "src.3", "src.2",
+ "src.1", "src.0",
+ "mix.1", "mix.0",
+ "ctu.1", "ctu.0",
+ "dvc.0", "dvc.1",
+ "clk_a", "clk_b", "clk_i";
(snip)
+ reset-names = "ssi-all",
+ "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+ "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+ "ssi.1", "ssi.0";
These are strange.
77995 has SSI3/4 only,right ?
I intend to update as follows
+ resets = <&cpg 1005>,
+ <&cpg 1011>, <&cpg 1012>;
+ reset-names = "ssi-all",
+ "ssi.4", "ssi.3";
+ status = "disabled";
And finally to declare new node method with ssi, ssiu: I updated as follows.
+ rcar_sound,src {
+ src0: src-0 {
+ status = "disabled";
+ };
+ src1: src-1 {
+ status = "disabled";
+ };
+ src2: src-2 {
+ status = "disabled";
+ };
+ src3: src-3 {
+ status = "disabled";
+ };
+ src4: src-4 {
+ status = "disabled";
+ };
+ src5: src-5 {
+ interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+ dma-names = "rx", "tx";
+ };
+ src6: src-6 {
+ interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x91>, <&audma0 0xb4>;
+ dma-names = "rx", "tx";
+ };
+ src7: src-7 {
+ status = "disabled";
+ };
+ src8: src-8 {
+ status = "disabled";
+ };
+ src9: src-9 {
+ status = "disabled";
+ };
+ };
+
+ rcar_sound,ssiu {
+ ssiu00: ssiu-0 {
+ status = "disabled";
+ };
+ ssiu01: ssiu-1 {
+ status = "disabled";
+ };
+ ssiu02: ssiu-2 {
+ status = "disabled";
+ };
+ ssiu03: ssiu-3 {
+ status = "disabled";
+ };
+ ssiu04: ssiu-4 {
+ status = "disabled";
+ };
+ ssiu05: ssiu-5 {
+ status = "disabled";
+ };
+ ssiu06: ssiu-6 {
+ status = "disabled";
+ };
+ ssiu07: ssiu-7 {
+ status = "disabled";
+ };
+ ssiu10: ssiu-8 {
+ status = "disabled";
+ };
+ ssiu11: ssiu-9 {
+ status = "disabled";
+ };
+ ssiu12: ssiu-10 {
+ status = "disabled";
+ };
+ ssiu13: ssiu-11 {
+ status = "disabled";
+ };
+ ssiu14: ssiu-12 {
+ status = "disabled";
+ };
+ ssiu15: ssiu-13 {
+ status = "disabled";
+ };
+ ssiu16: ssiu-14 {
+ status = "disabled";
+ };
+ ssiu17: ssiu-15 {
+ status = "disabled";
+ };
+ ssiu20: ssiu-16 {
+ status = "disabled";
+ };
+ ssiu21: ssiu-17 {
+ status = "disabled";
+ };
+ ssiu22: ssiu-18 {
+ status = "disabled";
+ };
+ ssiu23: ssiu-19 {
+ status = "disabled";
+ };
+ ssiu24: ssiu-20 {
+ status = "disabled";
+ };
+ ssiu25: ssiu-21 {
+ status = "disabled";
+ };
+ ssiu26: ssiu-22 {
+ status = "disabled";
+ };
+ ssiu27: ssiu-23 {
+ status = "disabled";
+ };
+ ssiu30: ssiu-24 {
+ dmas = <&audma0 0x6f>, <&audma0 0x70>;
+ dma-names = "rx", "tx";
+ };
+ ssiu31: ssiu-25 {
+ status = "disabled";
+ };
+ ssiu32: ssiu-26 {
+ status = "disabled";
+ };
+ ssiu33: ssiu-27 {
+ status = "disabled";
+ };
+ ssiu34: ssiu-28 {
+ status = "disabled";
+ };
+ ssiu35: ssiu-29 {
+ status = "disabled";
+ };
+ ssiu36: ssiu-30 {
+ status = "disabled";
+ };
+ ssiu37: ssiu-31 {
+ status = "disabled";
+ };
+ ssiu40: ssiu-32 {
+ dmas = <&audma0 0x71>, <&audma0 0x72>;
+ dma-names = "rx", "tx";
+ };
+ ssiu41: ssiu-33 {
+ status = "disabled";
+ };
+ ssiu42: ssiu-34 {
+ status = "disabled";
+ };
+ ssiu43: ssiu-35 {
+ status = "disabled";
+ };
+ ssiu44: ssiu-36 {
+ status = "disabled";
+ };
+ ssiu45: ssiu-37 {
+ status = "disabled";
+ };
+ ssiu46: ssiu-38 {
+ status = "disabled";
+ };
+ ssiu47: ssiu-39 {
+ status = "disabled";
+ };
+ ssiu50: ssiu-40 {
+ status = "disabled";
+ };
+ ssiu60: ssiu-41 {
+ status = "disabled";
+ };
+ ssiu70: ssiu-42 {
+ status = "disabled";
+ };
+ ssiu80: ssiu-43 {
+ status = "disabled";
+ };
+ ssiu90: ssiu-44 {
+ status = "disabled";
+ };
+ ssiu91: ssiu-45 {
+ status = "disabled";
+ };
+ ssiu92: ssiu-46 {
+ status = "disabled";
+ };
+ ssiu93: ssiu-47 {
+ status = "disabled";
+ };
+ ssiu94: ssiu-48 {
+ status = "disabled";
+ };
+ ssiu95: ssiu-49 {
+ status = "disabled";
+ };
+ ssiu96: ssiu-50 {
+ status = "disabled";
+ };
+ ssiu97: ssiu-51 {
+ status = "disabled";
+ };
+ };
+
+ rcar_sound,ssi {
+ ssi0: ssi-0 {
+ status = "disabled";
+ };
+ ssi1: ssi-1 {
+ status = "disabled";
+ };
+ ssi2: ssi-2 {
+ status = "disabled";
+ };
+ ssi3: ssi-3 {
+ interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x07>, <&audma0 0x08>;
+ dma-names = "rx", "tx";
+ };
+ ssi4: ssi-4 {
+ interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&audma0 0x09>, <&audma0 0x0a>;
+ dma-names = "rx", "tx";
+ };
+ ssi5: ssi-5 {
+ status = "disabled";
+ };
+ ssi6: ssi-6 {
+ status = "disabled";
+ };
+ ssi7: ssi-7 {
+ status = "disabled";
+ };
+ ssi8: ssi-8 {
+ status = "disabled";
+ };
Although I checked with the testing Sound-driver.
What do you think and can you give me new suggestions.
I'm sorry for bothering a lot of this place.
Thanks You
Hoan.
