Hi xxx
Hi Hoan
> + rcar_sound,src {
> + src0: src-0 {
> + status = "disabled";
> + };
> + src1: src-1 {
> + status = "disabled";
> + };
> + src2: src-2 {
> + status = "disabled";
> + };
> + src3: src-3 {
> + status = "disabled";
> + };
> + src4: src-4 {
> + status = "disabled";
> + };
> + src5: src-5 {
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x8f>, <&audma0 0xb2>;
> + dma-names = "rx", "tx";
> + };
> + src6: src-6 {
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x91>, <&audma0 0xb4>;
> + dma-names = "rx", "tx";
> + };
> + src7: src-7 {
> + status = "disabled";
> + };
> + src8: src-8 {
> + status = "disabled";
> + };
> + src9: src-9 {
> + status = "disabled";
> + };
> + };
I think src6 - src9 are not needed here.
> + rcar_sound,ssiu {
> + ssiu00: ssiu-0 {
> + status = "disabled";
> + };
(snip)
> + ssiu30: ssiu-24 {
> + dmas = <&audma0 0x6f>, <&audma0 0x70>;
> + dma-names = "rx", "tx";
> + };
(snip)
> + ssiu40: ssiu-32 {
> + dmas = <&audma0 0x71>, <&audma0 0x72>;
> + dma-names = "rx", "tx";
> + };
> + ssiu41: ssiu-33 {
> + status = "disabled";
> + };
(snip)
> + ssiu97: ssiu-51 {
> + status = "disabled";
> + };
> + };
We need to update ssiu.c to avoid disabled SSIU,
then we can avoid ssiu-33 - ssiu-51.
> + rcar_sound,ssi {
> + ssi0: ssi-0 {
> + status = "disabled";
> + };
> + ssi1: ssi-1 {
> + status = "disabled";
> + };
> + ssi2: ssi-2 {
> + status = "disabled";
> + };
> + ssi3: ssi-3 {
> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x07>, <&audma0 0x08>;
> + dma-names = "rx", "tx";
> + };
> + ssi4: ssi-4 {
> + interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
> + dmas = <&audma0 0x09>, <&audma0 0x0a>;
> + dma-names = "rx", "tx";
> + };
> + ssi5: ssi-5 {
> + status = "disabled";
> + };
> + ssi6: ssi-6 {
> + status = "disabled";
> + };
> + ssi7: ssi-7 {
> + status = "disabled";
> + };
> + ssi8: ssi-8 {
> + status = "disabled";
> + };
I think ssi-5 - ssi-8 are not needed
Thank you for your help !!
Best regards
---
Kuninori Morimoto
