> From: Biju Das <[email protected]>
> Sent: 02 October 2019 11:08
> Subject: [PATCH v2 9/9] arm64: dts: renesas: Add support for Advantech 
> idk-1110wr LVDS panel
> 
> This patch adds support for Advantech idk-1110wr LVDS panel.
> The HiHope RZ/G2[MN] is advertised as compatible with panel
> idk-1110wr from Advantech, however the panel isn't sold alongside
> the board.
> 
> Signed-off-by: Biju Das <[email protected]>

Signed-off-by: Fabrizio Castro <[email protected]>

> ---
>  V1-->V2
>    * Incorporated Laurent's review comments
> ---
>  .../renesas/rzg2-advantech-idk-1110wr-panel.dtsi   | 42 
> ++++++++++++++++++++++
>  1 file changed, 42 insertions(+)
>  create mode 100644 
> arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
> 
> diff --git a/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi 
> b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-
> 1110wr-panel.dtsi
> new file mode 100644
> index 0000000..4f876df
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/rzg2-advantech-idk-1110wr-panel.dtsi
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree Source for the Advantech idk-1110wr LVDS panel connected
> + * to RZ/G2 boards
> + *
> + * Copyright (C) 2019 Renesas Electronics Corp.
> + */
> +
> +/ {
> +
> +     panel-lvds {
> +             compatible = "advantech,idk-1110wr", "panel-lvds";
> +
> +             width-mm = <223>;
> +             height-mm = <125>;
> +
> +             data-mapping = "jeida-24";
> +
> +             panel-timing {
> +                     /* 1024x600 @60Hz */
> +                     clock-frequency = <51200000>;
> +                     hactive = <1024>;
> +                     vactive = <600>;
> +                     hsync-len = <240>;
> +                     hfront-porch = <40>;
> +                     hback-porch = <40>;
> +                     vfront-porch = <15>;
> +                     vback-porch = <10>;
> +                     vsync-len = <10>;
> +             };
> +
> +             port {
> +                     panel_in: endpoint {
> +                             remote-endpoint = <&lvds_connector>;
> +                     };
> +             };
> +     };
> +};
> +
> +&lvds_connector {
> +     remote-endpoint = <&panel_in>;
> +};
> --
> 2.7.4

Reply via email to