On Mon, May 06, 2019 at 06:46:30PM -0500, Chris Brandt wrote:
> Add USB Device support for RZ/A2.
>
> Signed-off-by: Chris Brandt <[email protected]>
> ---
> arch/arm/boot/dts/r7s9210.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
> index 1a992e6197c3..67ac746142d0 100644
> --- a/arch/arm/boot/dts/r7s9210.dtsi
> +++ b/arch/arm/boot/dts/r7s9210.dtsi
> @@ -354,6 +354,18 @@
> status = "disabled";
> };
>
> + usbhs0: usbhs@e8219000 {
> + compatible =
> "renesas,usbhs-r7s9210","renesas,rza2-usbhs";
Hi Chris,
please add a space after ",". Likewise below.
Otherwise this patch looks good to me.
> + reg = <0xe8219000 0x724>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 61>;
> + renesas,buswait = <7>;
> + phys = <&usb2_phy0>;
> + phy-names = "usb";
> + power-domains = <&cpg>;
> + status = "disabled";
> + };
> +
> ohci1: usbhcd@e821a000 {
> compatible = "generic-ohci";
> reg = <0xe821a000 0x100>;
> @@ -386,6 +398,18 @@
> status = "disabled";
> };
>
> + usbhs1: usbhs@e821b000 {
> + compatible =
> "renesas,usbhs-r7s9210","renesas,rza2-usbhs";
> + reg = <0xe821b000 0x724>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cpg CPG_MOD 60>;
> + renesas,buswait = <7>;
> + phys = <&usb2_phy1>;
> + phy-names = "usb";
> + power-domains = <&cpg>;
> + status = "disabled";
> + };
> +
> sdhi0: sd@e8228000 {
> compatible = "renesas,sdhi-r7s9210";
> reg = <0xe8228000 0x8c0>;
> --
> 2.16.1
>
