On Wed, May 08, 2019 at 11:43:13AM +0200, Simon Horman wrote:
> On Mon, May 06, 2019 at 06:46:30PM -0500, Chris Brandt wrote:
> > Add USB Device support for RZ/A2.
> >
> > Signed-off-by: Chris Brandt <[email protected]>
> > ---
> > arch/arm/boot/dts/r7s9210.dtsi | 24 ++++++++++++++++++++++++
> > 1 file changed, 24 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r7s9210.dtsi b/arch/arm/boot/dts/r7s9210.dtsi
> > index 1a992e6197c3..67ac746142d0 100644
> > --- a/arch/arm/boot/dts/r7s9210.dtsi
> > +++ b/arch/arm/boot/dts/r7s9210.dtsi
> > @@ -354,6 +354,18 @@
> > status = "disabled";
> > };
> >
> > + usbhs0: usbhs@e8219000 {
> > + compatible =
> > "renesas,usbhs-r7s9210","renesas,rza2-usbhs";
>
> Hi Chris,
>
> please add a space after ",". Likewise below.
>
> Otherwise this patch looks good to me.
I meant to say, that it looks good but please address Sergei's feedback.
>
> > + reg = <0xe8219000 0x724>;
> > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 61>;
> > + renesas,buswait = <7>;
> > + phys = <&usb2_phy0>;
> > + phy-names = "usb";
> > + power-domains = <&cpg>;
> > + status = "disabled";
> > + };
> > +
> > ohci1: usbhcd@e821a000 {
> > compatible = "generic-ohci";
> > reg = <0xe821a000 0x100>;
> > @@ -386,6 +398,18 @@
> > status = "disabled";
> > };
> >
> > + usbhs1: usbhs@e821b000 {
> > + compatible =
> > "renesas,usbhs-r7s9210","renesas,rza2-usbhs";
> > + reg = <0xe821b000 0x724>;
> > + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 60>;
> > + renesas,buswait = <7>;
> > + phys = <&usb2_phy1>;
> > + phy-names = "usb";
> > + power-domains = <&cpg>;
> > + status = "disabled";
> > + };
> > +
> > sdhi0: sd@e8228000 {
> > compatible = "renesas,sdhi-r7s9210";
> > reg = <0xe8228000 0x8c0>;
> > --
> > 2.16.1
> >
>
