Marek Szyprowski wrote:
> 
> Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as
> S3C6400/S3C6410/S5P6440.
> 
> Signed-off-by: Marek Szyprowski <[email protected]>
> Signed-off-by: Kyungmin Park <[email protected]>
> ---
>  drivers/serial/Kconfig  |   16 ++++------------
>  drivers/serial/Makefile |    1 -
>  2 files changed, 4 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
> index 5f3f03d..302836a 100644
> --- a/drivers/serial/Kconfig
> +++ b/drivers/serial/Kconfig
> @@ -534,21 +534,13 @@ config SERIAL_S3C24A0
>         Serial port support for the Samsung S3C24A0 SoC
> 
>  config SERIAL_S3C6400
> -     tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
> -     depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 ||
> CPU_S5P6440)
> +     tristate "Samsung S3C6400/S3C6410/S5P6440/S5PC100 Serial port
> support"
> +     depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 ||
> CPU_S5P6440 || CPU_S5PC100)
>       select SERIAL_SAMSUNG_UARTS_4
>       default y
>       help
> -       Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
> -       SoCs
> -
> -config SERIAL_S5PC100
> -     tristate "Samsung S5PC100 Serial port support"
> -     depends on SERIAL_SAMSUNG && CPU_S5PC100
> -     select SERIAL_SAMSUNG_UARTS_4
> -     default y
> -     help
> -       Serial port support for the Samsung S5PC100 SoCs
> +       Serial port support for the Samsung S3C6400, S3C6410, S5P6440
> +       and S5PC100 SoCs
> 
>  config SERIAL_S5PV210
>       tristate "Samsung S5PV210 Serial port support"
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 6aa4723..328f107 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -44,7 +44,6 @@ obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
>  obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
>  obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o
>  obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
> -obj-$(CONFIG_SERIAL_S5PC100) += s3c6400.o
>  obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
>  obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
>  obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o
> --

Ok, updated the list of supported devices.

Looks good.

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to