Hello, On Wednesday, October 13, 2010 2:16 PM Sangbeom Kim wrote:
> From: Daein Moon <[email protected]> > > This patch adds support SROMC for S5PV310 and S5PC210. > > Signed-off-by: Daein Moon <[email protected]> > Signed-off-by: Sangbeom Kim <[email protected]> > --- > arch/arm/mach-s5pv310/cpu.c | 5 ++ > arch/arm/mach-s5pv310/include/mach/map.h | 4 ++ > arch/arm/mach-s5pv310/include/mach/regs-srom.h | 50 > ++++++++++++++++++++++++ > 3 files changed, 59 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-s5pv310/include/mach/regs-srom.h > > diff --git a/arch/arm/mach-s5pv310/cpu.c b/arch/arm/mach-s5pv310/cpu.c > index ffed262..873783a 100644 > --- a/arch/arm/mach-s5pv310/cpu.c > +++ b/arch/arm/mach-s5pv310/cpu.c > @@ -81,6 +81,11 @@ static struct map_desc s5pv310_iodesc[] __initdata = { > .pfn = __phys_to_pfn(S3C_PA_UART), > .length = SZ_512K, > .type = MT_DEVICE, > + }, { > + .virtual = (unsigned long)S5P_VA_SROMC, > + .pfn = __phys_to_pfn(S5PV310_PA_SROMC), > + .length = SZ_4K, > + .type = MT_DEVICE, > }, > }; Do You really need to make a permanent mapping for the SROMC area? Cannot the setup code in the mach-smdk*.c call ioremap(S5PV310_PA_SROMC) and put the address it got to the ethernet device? This area will be probably useless for boards other than SMDK. <snip> Best regards -- Marek Szyprowski Samsung Poland R&D Center -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
