oops, it's for Universal C210 so the subject should be: ARM: SAMSUNG: Correct M-5MOLS sensor clock frequency on Universal C210 board
Should I resend or would you fix it when applying. -- Regards, Sylwester On 01/25/2012 03:23 PM, Sylwester Nawrocki wrote: > In order to keep the sensor's master clock frequency in valid range > when FIMC parent clock is xusbxti, the specified frequency must be > exactly 24MHZ, otherwise it's being set to too low value due to > rounding. > > Signed-off-by: Sylwester Nawrocki<[email protected]> > Signed-off-by: Kyungmin Park<[email protected]> > --- > arch/arm/mach-exynos/mach-universal_c210.c | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/arch/arm/mach-exynos/mach-universal_c210.c > b/arch/arm/mach-exynos/mach-universal_c210.c > index 44fc43e..0e3aeb9 100644 > --- a/arch/arm/mach-exynos/mach-universal_c210.c > +++ b/arch/arm/mach-exynos/mach-universal_c210.c > @@ -973,7 +973,7 @@ static struct s5p_fimc_isp_info > universal_camera_sensors[] = { > .bus_type = FIMC_MIPI_CSI2, > .board_info =&m5mols_board_info, > .i2c_bus_num = 0, > - .clk_frequency = 21600000UL, > + .clk_frequency = 24000000UL, > .csi_data_align = 32, > }, > }; -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
