Sylwester Nawrocki wrote: > Hi Sylwester, > oops, it's for Universal C210 so the subject should be: > > ARM: SAMSUNG: Correct M-5MOLS sensor clock frequency on Universal C210 > board > OK, let me fix the subject when I apply.
> Should I resend or would you fix it when applying. > No :) Thanks. Best regards, Kgene. -- Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > -- > Regards, > Sylwester > > On 01/25/2012 03:23 PM, Sylwester Nawrocki wrote: > > In order to keep the sensor's master clock frequency in valid range > > when FIMC parent clock is xusbxti, the specified frequency must be > > exactly 24MHZ, otherwise it's being set to too low value due to > > rounding. > > > > Signed-off-by: Sylwester Nawrocki<[email protected]> > > Signed-off-by: Kyungmin Park<[email protected]> > > --- > > arch/arm/mach-exynos/mach-universal_c210.c | 2 +- > > 1 files changed, 1 insertions(+), 1 deletions(-) > > > > diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach- > exynos/mach-universal_c210.c > > index 44fc43e..0e3aeb9 100644 > > --- a/arch/arm/mach-exynos/mach-universal_c210.c > > +++ b/arch/arm/mach-exynos/mach-universal_c210.c > > @@ -973,7 +973,7 @@ static struct s5p_fimc_isp_info > universal_camera_sensors[] = { > > .bus_type = FIMC_MIPI_CSI2, > > .board_info =&m5mols_board_info, > > .i2c_bus_num = 0, > > - .clk_frequency = 21600000UL, > > + .clk_frequency = 24000000UL, > > .csi_data_align = 32, > > }, > > }; -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
