They have very few users and they're both just doing a single register write so the advantage of having the macro is a bit limited. An inline function might make sense but it's as easy to just do the writes directly.
Signed-off-by: Mark Brown <[email protected]> Acked-by: Linus Walleij <[email protected]> --- drivers/spi/spi-s3c64xx.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 1781365..d24ec80 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -79,11 +79,6 @@ #define S3C64XX_SPI_SLAVE_AUTO (1<<1) #define S3C64XX_SPI_SLAVE_SIG_INACT (1<<0) -#define S3C64XX_SPI_ACT(c) writel(0, (c)->regs + S3C64XX_SPI_SLAVE_SEL) - -#define S3C64XX_SPI_DEACT(c) writel(S3C64XX_SPI_SLAVE_SIG_INACT, \ - (c)->regs + S3C64XX_SPI_SLAVE_SEL) - #define S3C64XX_SPI_INT_TRAILING_EN (1<<6) #define S3C64XX_SPI_INT_RX_OVERRUN_EN (1<<5) #define S3C64XX_SPI_INT_RX_UNDERRUN_EN (1<<4) @@ -737,14 +732,15 @@ static int s3c64xx_spi_transfer_one_message(struct spi_master *master, enable_cs(sdd, spi); /* Start the signals */ - S3C64XX_SPI_ACT(sdd); + writel(0, sdd->regs + S3C64XX_SPI_SLAVE_SEL); spin_unlock_irqrestore(&sdd->lock, flags); status = wait_for_xfer(sdd, xfer, use_dma); /* Quiese the signals */ - S3C64XX_SPI_DEACT(sdd); + writel(S3C64XX_SPI_SLAVE_SIG_INACT, + sdd->regs + S3C64XX_SPI_SLAVE_SEL); if (status) { dev_err(&spi->dev, "I/O Error: " @@ -1030,7 +1026,7 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) sdd->cur_speed = 0; - S3C64XX_SPI_DEACT(sdd); + writel(S3C64XX_SPI_SLAVE_SIG_INACT, sdd->regs + S3C64XX_SPI_SLAVE_SEL); /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN); -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
