Pins used as wake-up interrupts need to be configured as EINTs. This
patch adds the required configuration code to exynos_wkup_irq_set_type,
to set the pin as EINT when its interrupt trigger type is configured.
Signed-off-by: Tomasz Figa <t.f...@samsung.com>
---
drivers/pinctrl/pinctrl-exynos.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index fa6a5be..8cc8018 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -257,6 +257,7 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd,
unsigned int type)
unsigned long reg_con = d->ctrl->weint_con + bank->eint_offset;
unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
unsigned long con, trig_type;
+ unsigned int mask;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
@@ -288,6 +289,16 @@ static int exynos_wkup_irq_set_type(struct irq_data *irqd,
unsigned int type)
con &= ~(EXYNOS_EINT_CON_MASK << shift);
con |= trig_type << shift;
writel(con, d->virt_base + reg_con);
+
+ reg_con = bank->pctl_offset;
+ shift = pin * bank->func_width;
+ mask = (1 << bank->func_width) - 1;
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(mask << shift);
+ con |= EXYNOS_EINT_FUNC << shift;
+ writel(con, d->virt_base + reg_con);
+
return 0;
}
--
1.7.12
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
