On 08/19/2013 02:58 PM, Hans Verkuil wrote:
> On 08/19/2013 12:58 PM, Shaik Ameer Basha wrote:
>> This patch adds the memory to memory (m2m) interface functionality
>> for the M-Scaler driver.
>
> Just one small comment below...
>
>>
>> Signed-off-by: Shaik Ameer Basha <[email protected]>
>> ---
>> drivers/media/platform/exynos-mscl/mscl-m2m.c | 763
>> +++++++++++++++++++++++++
>> 1 file changed, 763 insertions(+)
>> create mode 100644 drivers/media/platform/exynos-mscl/mscl-m2m.c
>>
>> diff --git a/drivers/media/platform/exynos-mscl/mscl-m2m.c
>> b/drivers/media/platform/exynos-mscl/mscl-m2m.c
>> new file mode 100644
>> index 0000000..fecbb57
>> --- /dev/null
>> +++ b/drivers/media/platform/exynos-mscl/mscl-m2m.c
>> @@ -0,0 +1,763 @@
>> +/*
>> + * Copyright (c) 2013 - 2014 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Samsung EXYNOS5 SoC series M-Scaler driver
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published
>> + * by the Free Software Foundation, either version 2 of the License,
>> + * or (at your option) any later version.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/slab.h>
>> +
>> +#include <media/v4l2-ioctl.h>
>> +
>> +#include "mscl-core.h"
>> +
>> +static int mscl_m2m_ctx_stop_req(struct mscl_ctx *ctx)
>> +{
>> + struct mscl_ctx *curr_ctx;
>> + struct mscl_dev *mscl = ctx->mscl_dev;
>> + int ret;
>> +
>> + curr_ctx = v4l2_m2m_get_curr_priv(mscl->m2m.m2m_dev);
>> + if (!mscl_m2m_pending(mscl) || (curr_ctx != ctx))
>> + return 0;
>> +
>> + mscl_ctx_state_lock_set(MSCL_CTX_STOP_REQ, ctx);
>> + ret = wait_event_timeout(mscl->irq_queue,
>> + !mscl_ctx_state_is_set(MSCL_CTX_STOP_REQ, ctx),
>> + MSCL_SHUTDOWN_TIMEOUT);
>> +
>> + return ret == 0 ? -ETIMEDOUT : ret;
>> +}
>> +
>> +static int mscl_m2m_start_streaming(struct vb2_queue *q, unsigned int count)
>> +{
>> + struct mscl_ctx *ctx = q->drv_priv;
>> + int ret;
>> +
>> + ret = pm_runtime_get_sync(&ctx->mscl_dev->pdev->dev);
>> +
>> + return ret > 0 ? 0 : ret;
>> +}
>> +
>> +static int mscl_m2m_stop_streaming(struct vb2_queue *q)
>> +{
>> + struct mscl_ctx *ctx = q->drv_priv;
>> + int ret;
>> +
>> + ret = mscl_m2m_ctx_stop_req(ctx);
>> + if (ret == -ETIMEDOUT)
>> + mscl_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
>> +
>> + pm_runtime_put(&ctx->mscl_dev->pdev->dev);
>> +
>> + return 0;
>> +}
>> +
>> +void mscl_m2m_job_finish(struct mscl_ctx *ctx, int vb_state)
>> +{
>> + struct vb2_buffer *src_vb, *dst_vb;
>> +
>> + if (!ctx || !ctx->m2m_ctx)
>> + return;
>> +
>> + src_vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
>> + dst_vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
>> +
>> + if (src_vb && dst_vb) {
>> + v4l2_m2m_buf_done(src_vb, vb_state);
>> + v4l2_m2m_buf_done(dst_vb, vb_state);
>> +
>> + v4l2_m2m_job_finish(ctx->mscl_dev->m2m.m2m_dev,
>> + ctx->m2m_ctx);
>> + }
>> +}
>> +
>> +
>> +static void mscl_m2m_job_abort(void *priv)
>> +{
>> + struct mscl_ctx *ctx = priv;
>> + int ret;
>> +
>> + ret = mscl_m2m_ctx_stop_req(ctx);
>> + if (ret == -ETIMEDOUT)
>> + mscl_m2m_job_finish(ctx, VB2_BUF_STATE_ERROR);
>> +}
>> +
>> +static int mscl_get_bufs(struct mscl_ctx *ctx)
>> +{
>> + struct mscl_frame *s_frame, *d_frame;
>> + struct vb2_buffer *src_vb, *dst_vb;
>> + int ret;
>> +
>> + s_frame = &ctx->s_frame;
>> + d_frame = &ctx->d_frame;
>> +
>> + src_vb = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
>> + ret = mscl_prepare_addr(ctx, src_vb, s_frame, &s_frame->addr);
>> + if (ret)
>> + return ret;
>> +
>> + dst_vb = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
>> + ret = mscl_prepare_addr(ctx, dst_vb, d_frame, &d_frame->addr);
>> + if (ret)
>> + return ret;
>> +
>> + dst_vb->v4l2_buf.timestamp = src_vb->v4l2_buf.timestamp;
>> +
>> + return 0;
>> +}
>> +
>> +static void mscl_m2m_device_run(void *priv)
>> +{
>> + struct mscl_ctx *ctx = priv;
>> + struct mscl_dev *mscl;
>> + unsigned long flags;
>> + int ret;
>> + bool is_set = false;
>> +
>> + if (WARN(!ctx, "null hardware context\n"))
>> + return;
>> +
>> + mscl = ctx->mscl_dev;
>> + spin_lock_irqsave(&mscl->slock, flags);
>> +
>> + set_bit(ST_M2M_PEND, &mscl->state);
>> +
>> + /* Reconfigure hardware if the context has changed. */
>> + if (mscl->m2m.ctx != ctx) {
>> + dev_dbg(&mscl->pdev->dev,
>> + "mscl->m2m.ctx = 0x%p, current_ctx = 0x%p",
>> + mscl->m2m.ctx, ctx);
>> + ctx->state |= MSCL_PARAMS;
>> + mscl->m2m.ctx = ctx;
>> + }
>> +
>> + is_set = (ctx->state & MSCL_CTX_STOP_REQ) ? 1 : 0;
>> + ctx->state &= ~MSCL_CTX_STOP_REQ;
>> + if (is_set) {
>> + wake_up(&mscl->irq_queue);
>> + goto put_device;
>> + }
>> +
>> + ret = mscl_get_bufs(ctx);
>> + if (ret) {
>> + dev_dbg(&mscl->pdev->dev, "Wrong address");
>> + goto put_device;
>> + }
>> +
>> + mscl_hw_address_queue_reset(ctx);
>> + mscl_set_prefbuf(mscl, &ctx->s_frame);
>> + mscl_hw_set_input_addr(mscl, &ctx->s_frame.addr);
>> + mscl_hw_set_output_addr(mscl, &ctx->d_frame.addr);
>> + mscl_hw_set_csc_coeff(ctx);
>> +
>> + if (ctx->state & MSCL_PARAMS) {
>> + mscl_hw_set_irq_mask(mscl, MSCL_INT_FRAME_END, false);
>> + if (mscl_set_scaler_info(ctx)) {
>> + dev_dbg(&mscl->pdev->dev, "Scaler setup error");
>> + goto put_device;
>> + }
>> +
>> + mscl_hw_set_in_size(ctx);
>> + mscl_hw_set_in_image_format(ctx);
>> +
>> + mscl_hw_set_out_size(ctx);
>> + mscl_hw_set_out_image_format(ctx);
>> +
>> + mscl_hw_set_scaler_ratio(ctx);
>> + mscl_hw_set_rotation(ctx);
>> + }
>> +
>> + ctx->state &= ~MSCL_PARAMS;
>> + mscl_hw_enable_control(mscl, true);
>> +
>> + spin_unlock_irqrestore(&mscl->slock, flags);
>> + return;
>> +
>> +put_device:
>> + ctx->state &= ~MSCL_PARAMS;
>> + spin_unlock_irqrestore(&mscl->slock, flags);
>> +}
>> +
>> +static int mscl_m2m_queue_setup(struct vb2_queue *vq,
>> + const struct v4l2_format *fmt,
>> + unsigned int *num_buffers, unsigned int *num_planes,
>> + unsigned int sizes[], void *allocators[])
>> +{
>> + struct mscl_ctx *ctx = vb2_get_drv_priv(vq);
>> + struct mscl_frame *frame;
>> + int i;
>> +
>> + frame = ctx_get_frame(ctx, vq->type);
>> + if (IS_ERR(frame))
>> + return PTR_ERR(frame);
>> +
>> + if (!frame->fmt)
>> + return -EINVAL;
>> +
>> + *num_planes = frame->fmt->num_planes;
>> + for (i = 0; i < frame->fmt->num_planes; i++) {
>> + sizes[i] = frame->payload[i];
>> + allocators[i] = ctx->mscl_dev->alloc_ctx;
>> + }
>> + return 0;
>> +}
>> +
>> +static int mscl_m2m_buf_prepare(struct vb2_buffer *vb)
>> +{
>> + struct mscl_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
>> + struct mscl_frame *frame;
>> + int i;
>> +
>> + frame = ctx_get_frame(ctx, vb->vb2_queue->type);
>> + if (IS_ERR(frame))
>> + return PTR_ERR(frame);
>> +
>> + if (!V4L2_TYPE_IS_OUTPUT(vb->vb2_queue->type)) {
>> + for (i = 0; i < frame->fmt->num_planes; i++)
>> + vb2_set_plane_payload(vb, i, frame->payload[i]);
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void mscl_m2m_buf_queue(struct vb2_buffer *vb)
>> +{
>> + struct mscl_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
>> +
>> + dev_dbg(&ctx->mscl_dev->pdev->dev,
>> + "ctx: %p, ctx->state: 0x%x", ctx, ctx->state);
>> +
>> + if (ctx->m2m_ctx)
>> + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
>> +}
>> +
>> +static struct vb2_ops mscl_m2m_qops = {
>> + .queue_setup = mscl_m2m_queue_setup,
>> + .buf_prepare = mscl_m2m_buf_prepare,
>> + .buf_queue = mscl_m2m_buf_queue,
>> + .wait_prepare = mscl_unlock,
>> + .wait_finish = mscl_lock,
>> + .stop_streaming = mscl_m2m_stop_streaming,
>> + .start_streaming = mscl_m2m_start_streaming,
>> +};
>> +
>> +static int mscl_m2m_querycap(struct file *file, void *fh,
>> + struct v4l2_capability *cap)
>> +{
>> + struct mscl_ctx *ctx = fh_to_ctx(fh);
>> + struct mscl_dev *mscl = ctx->mscl_dev;
>> +
>> + strlcpy(cap->driver, mscl->pdev->name, sizeof(cap->driver));
>> + strlcpy(cap->card, mscl->pdev->name, sizeof(cap->card));
>> + strlcpy(cap->bus_info, "platform", sizeof(cap->bus_info));
I forgot to mention that the bus_info should be renamed as well to something
like: "platform:exynos-mscl".
Regards,
Hans
>> + cap->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_VIDEO_M2M_MPLANE |
>> + V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE;
>
> No V4L2_CAP_VIDEO_CAPTURE_MPLANE | V4L2_CAP_VIDEO_OUTPUT_MPLANE, it should
> just be
> V4L2_CAP_VIDEO_M2M_MPLANE.
>
>> +
>> + cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
>> +
>> + return 0;
>> +}
>> +
>
> Regards,
>
> Hans
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
