Hi Sylwester, Thanks for the comments. Please find the response inline...
Actually, I am waiting for your comments only :) are you also reviewing the driver code? If yes, I can delay the next version until your post your comments. On Sun, Aug 25, 2013 at 3:56 AM, Sylwester Nawrocki <sylvester.nawro...@gmail.com> wrote: > On 08/19/2013 02:57 PM, Inki Dae wrote: >>> >>> -----Original Message----- >>> From: linux-media-ow...@vger.kernel.org [mailto:linux-media- >>> ow...@vger.kernel.org] On Behalf Of Shaik Ameer Basha >>> Sent: Monday, August 19, 2013 7:59 PM >>> To: linux-me...@vger.kernel.org; linux-samsung-soc@vger.kernel.org >>> Cc: s.nawro...@samsung.com; posc...@google.com; arun...@samsung.com; >>> shaik.am...@samsung.com >>> Subject: [PATCH v2 4/5] [media] exynos-mscl: Add DT bindings for M-Scaler >>> driver >>> >>> This patch adds the DT binding documentation for the exynos5 > > > You may want to say to which specific SoC it applies. Ok. will update this. Only 5410 and 5420 has this IP as of now. > > >>> based M-Scaler device driver. >>> >>> Signed-off-by: Shaik Ameer Basha<shaik.am...@samsung.com> >>> --- >>> .../devicetree/bindings/media/exynos5-mscl.txt | 34 >>> ++++++++++++++++++++ >>> 1 file changed, 34 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/media/exynos5- >>> mscl.txt >>> >>> diff --git a/Documentation/devicetree/bindings/media/exynos5-mscl.txt >>> b/Documentation/devicetree/bindings/media/exynos5-mscl.txt >>> new file mode 100644 >>> index 0000000..5c9d1b1 >>> --- /dev/null >>> +++ b/Documentation/devicetree/bindings/media/exynos5-mscl.txt >>> @@ -0,0 +1,34 @@ >>> +* Samsung Exynos5 M-Scaler device >>> + >>> +M-Scaler is used for scaling, blending, color fill and color space >>> +conversion on EXYNOS5 SoCs. >>> + >>> +Required properties: >>> +- compatible: should be "samsung,exynos5-mscl" > > > What is an exact name of this IP in the datasheet ? It is named as "SCALER". But when i got the Initial doc, it was also known as memory to memory scaler. so, i am using M-Scaler. Can i change this name to SCALER instead ? > > >> If Exynos5410/5420 have same IP, >> "samsung,exynos5410-mscl" for M Scaler IP in Exynos5410/5420" >> >> Else, >> Compatible: should be one of the following: >> (a) "samsung,exynos5410-mscl" for M Scaler IP in Exynos5410" >> (b) "samsung,exynos5420-mscl" for M Scaler IP in Exynos5420" > > > Yes, except I suspect "mscl" is incorrect. It sounds like an unclear > abbreviation of real name of the IP. It likely should be "mscaler". > > >>> +- reg: should contain M-Scaler physical address location and length. >>> +- interrupts: should contain M-Scaler interrupt number >>> +- clocks: should contain the clock number according to CCF > > > Hmm, this sounds like a Linux specific term in the binding. Perhaps: > > - clocks: should contain the M-Scaler clock specifier, from the common > clock bindings > > > ? >>> >>> +- clock-names: should be "mscl" >>> + >>> +Example: >>> + >>> + mscl_0: mscl@0x12800000 { > > > s/0x// Ok. Like this? mscl_0: mscl@12800000 { > > >>> + compatible = "samsung,exynos5-mscl"; >> >> >> "samsung,exynos5410-mscl"; >> >>> + reg =<0x12800000 0x1000>; >>> + interrupts =<0 220 0>; >>> + clocks =<&clock 381>; >>> + clock-names = "mscl"; >>> + }; >>> + >>> +Aliases: >>> +Each M-Scaler node should have a numbered alias in the aliases node, >>> +in the form of msclN, N = 0...2. M-Scaler driver uses these aliases >>> +to retrieve the device IDs using "of_alias_get_id()" call. > > > So except in debug logs and for selecting variant data (which is same for > all IP instances) are the aliases used for anything else ? > I suspect you could do without these aliases. Device name includes start > address of the IP register region, so that could be used to identify the > M-Scaler instance in the logs. Ok. I will check more. If it is only used for logs, then i will remove the aliases. Regards, Shaik Ameer Basha > > -- > Regards, > Sylwester > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
